Do you think this combo will have piston to valve problems?

skiwesser · 04-27-2005, 10:34 PM

First off I will check it out, but want to know what you guy's think.
.030 bored stock block with flattops, comp XE264HR (.544 lift w/1.7's, 212/218 @ .050 114* lsa). With E7's milled .035"
Think I'll have piston-to-valve issues?

red82gt · 04-28-2005, 01:18 AM

I wouldn't think so-if you install the cam as reccommended.

04-27-2005, 10:34 PM	#1
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Do you think this combo will have piston to valve problems? First off I will check it out, but want to know what you guy's think. .030 bored stock block with flattops, comp XE264HR (.544 lift w/1.7's, 212/218 @ .050 114* lsa). With E7's milled .035" Think I'll have piston-to-valve issues?

04-28-2005, 01:18 AM	#2
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	Re: Do you think this combo will have piston to valve problems? I wouldn't think so-if you install the cam as reccommended. __________________ 393W: AFR 205's, hydraulic roller, TKO600.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Piston to Valve Clearance Check - 351W	Peldor	Classic Mustangs	4	01-31-2008 08:29 PM
AFR 185's w/E-303: Piston to valve clearance problems?	yelowjaket	Windsor Power	9	04-01-2003 07:50 PM
valve seal vs piston ring oil leak.	thdrcat	Classic Mustangs	2	07-30-2002 07:06 PM
Piston Valve Relief CC's	elmir50	Windsor Power	2	08-08-2001 12:23 AM
Please - I need advice on piston to valve clearance ASAP	2FastLX	Windsor Power	8	03-18-2001 03:05 PM