Help!

Scrapla · 10-07-2003, 08:20 AM

My clutch cable came off the quadrant and the grommit in the fire wall rotted off so its just a hole there now nothing to really hold the cable where can I get a gromit like that? Also where is the quad. located under there where the pedal assebly is cause I had a bbk metal one installed when I had a tranny rebuild so I dont know where or how to fix this, any suggestions would help thanks.

billheis · 10-07-2003, 09:17 AM

The bushing comes on the cable and Idon't know if its availble separately. Try Steeda or UPR Products (theyre both in S. FL) for a new adjustable cable. when you get the new cable, put it through the firewall first and put the end over the hook on the quad first Its way up there but laying on your back with some light you can see it. The adjuster part is down at the trans.
Bill

Scrapla · 10-07-2003, 05:58 PM

Well the cable is fine, and nothing snapped it just came loose from under the dash I just dont know where it goes.

billheis · 10-07-2003, 10:15 PM

You gotta stand on your head but when you look up there youll see on the quad right at the end where it gos. Just take the cable loose fron thetrans end and hook the cable on (if you have a friend to help, have them pull on the cable once you have it hooked) then adjust the cable

Scrapla · 10-09-2003, 12:43 AM

I got it, I used a rubber gromit from pep boys along with what was left of the stock one, but after all that trouble of messin with the cable and fixing the gromit I goto open my door and the handle snapped off LOL

10-07-2003, 08:20 AM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Help! My clutch cable came off the quadrant and the grommit in the fire wall rotted off so its just a hole there now nothing to really hold the cable where can I get a gromit like that? Also where is the quad. located under there where the pedal assebly is cause I had a bbk metal one installed when I had a tranny rebuild so I dont know where or how to fix this, any suggestions would help thanks. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

10-07-2003, 09:17 AM	#2
billheis Registered Member Join Date: May 2001 Location: Fernandina Beach, FL 32034 Posts: 178	The bushing comes on the cable and Idon't know if its availble separately. Try Steeda or UPR Products (theyre both in S. FL) for a new adjustable cable. when you get the new cable, put it through the firewall first and put the end over the hook on the quad first Its way up there but laying on your back with some light you can see it. The adjuster part is down at the trans. Bill __________________ Bill Heiser 90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter

10-07-2003, 05:58 PM	#3
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Well the cable is fine, and nothing snapped it just came loose from under the dash I just dont know where it goes. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

10-07-2003, 10:15 PM	#4
billheis Registered Member Join Date: May 2001 Location: Fernandina Beach, FL 32034 Posts: 178	You gotta stand on your head but when you look up there youll see on the quad right at the end where it gos. Just take the cable loose fron thetrans end and hook the cable on (if you have a friend to help, have them pull on the cable once you have it hooked) then adjust the cable __________________ Bill Heiser 90 Convertable 5.0 LX, ported E7s w/ THumper valve job, TFS street, FR 65mm TB, B cam w/1.7 cobra rockers, kirban AFPR, Mac CAI, Mac Headers, off road h, 3 chamber flows, Crane ign. box, 3:73s, Art Carr AOD & 2600 converter

10-09-2003, 12:43 AM	#5
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	I got it, I used a rubber gromit from pep boys along with what was left of the stock one, but after all that trouble of messin with the cable and fixing the gromit I goto open my door and the handle snapped off LOL __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73