Linear Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-17-2009, 11:05 PM
|
#1 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
people with strokers what tranny are you running
well its time to get a tranny...they stroker didnt like the t5wc its in picecs..i have between 450 to 500hp and will be spraying a 150 shot with slicks and car is 3000 lbs.i have herd so many mixed reviews on the tko600 and some richmond boxes.2 or 3 grand is alot to spend if its gonna blow.
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's  1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
03-29-2009, 09:59 AM
|
#2 |
|
Registered Member
Join Date: Feb 2000
Location: Washington, MO
Posts: 327
|
Re: people with strokers what tranny are you running
Put an auto in it and be done. Otherwise if your really wanting the stickshift, I'd have a G-force prepped tranny. At least you'll have a chance of it lasting awhile.
__________________
93' Cobra with a cogged NOVI 2k, R331 |
|
|
|
|
04-01-2009, 05:09 PM
|
#3 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: people with strokers what tranny are you running
yea i hear that but i am good at shifting and i like the overdrive because the track is 45min away.the c4 would be the way to go but im gonna get board with out banging gears
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
04-15-2009, 08:49 AM
|
#4 |
|
12 Sec Stock Motor Club
Join Date: Jun 2002
Location: Baytown, TX
Posts: 15
|
Re: people with strokers what tranny are you running
i have a G-Force 5-Speed behind my 331 with a Spec St. 3 clutch, i like it. No complaints.
__________________
-Jayme 1990 Mustang LX 12.16 @ 116.65mph My NEW MustangWorks Page 1990 Mustang GT -Sold- 12.996 @ 104.21mph 1.72 RRs, Pro-M 75mm MAF, Kirban Regulator, BBK Headers, BBK Off-Road X-Pipe, MAC Cat-Back, ASP Pulleys, BBK 70mm TB/EGR, BBK Cold Air, 3.73 Gears, Hurst Short Throw, King Cobra Clutch, 4-Cyl Front Springs, BBK Rear, 90/10 Struts & 50/50 Shocks, Lakewood Lower Control Arms and Weld Draglites. My MustangWorks Page |
|
|
|
|
04-16-2009, 11:00 AM
|
#5 | |
|
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Re: people with strokers what tranny are you running
Quote:
My stock T5 held up to my 331 with a 150shot, running 11.00's with 1.5 60ft's, launching at 6k off the line.. You could go with a T45 or the tremmec, both will hold up to quite a bit of abuse. Good luck
__________________
|
|
|
|
|
|
04-17-2009, 11:36 PM
|
#6 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: people with strokers what tranny are you running
well here is the story..i was running 11.8 when it was a injected 302 with a 150 shot at a 1.6 60ft..then i put the 347 in and ran a 12.2 because i was having carb problems.then i fixed the carb,it was wayy faster and blu the teeth off 2nd gear and the countershaft, so i never go to drag it after i fixed the carb.i am getting a tko this weekend for next to nothing so im gonna put it in and see what happends
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
04-20-2009, 02:20 PM
|
#7 |
|
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: people with strokers what tranny are you running
I would go with a G-force. The TKO 600 still has issues that need to be worked out.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
|
|
|
05-03-2009, 07:01 PM
|
#9 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: people with strokers what tranny are you running
well i got a tko 500 for a great deal from a good friend and it seems to work great...also i got a new carb..quick fuel technology 750 much better throttle response...
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone running a C-4 tranny I need HELP!!!!!!!! | mattcstang | Racer's Club House | 5 | 09-07-2006 11:43 PM |
| Info on 351w strokers | Dave_mustang_50 | Windsor Power | 13 | 08-01-2005 05:25 PM |
| Anyone know where to buy crate strokers ? | Ricks86GT | Windsor Power | 4 | 06-14-2001 10:24 PM |
| Are 347 & 393 strokers emissions legal?? | Stang_ROTY | Windsor Power | 6 | 05-08-2001 08:18 PM |
| STROKERS | ricky1 | Windsor Power | 4 | 02-21-2001 01:47 PM |