Need stock HO parts

LincoConti87 · 01-20-2001, 11:46 AM

Anyone know a good place I can find some stock HO parts? I need headers,exhaust,heads,upper and lower intake and some other stuff.
Ebay never has anything useful.If anyone in here has some stuff sitting in the garage let me know. I would really like a cheap set of stock headers and maybe exhaust to slap on to a 87 150 horse 5.0

------------------
Rob meister
89 Mercedes 190E 2.6
87 Lincoln Continental
Ex 86 Mercury Cougar

Shotgun28 · 01-20-2001, 12:48 PM

Linc: I have some stock headers, and a few other things just sitting in my garage after my exhaust over haul, the shop tossed my exhaust, but I have everything else. Just let me know if you want them, they are rusty, but very solid and would clean up with some work. I was keeping them in case I decided to sell my car, and keep my mods, but it would now cost me more to return to stock than to sell as is...Just write back in here, or via-e-mail...Thanks and good luck

------------------
91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...just ordered some new Red alum pulley's. Doing some big shopping of late, I will keep you posted.

quick89gt · 01-20-2001, 01:04 PM

Well, I have the stock upper and lower intakes off of my '89 Gt. I also have the stock heads off of my Gt. They have 117,000 miles on them, and are clean. I had no problems at all with the car when I rebuilt the motor..I just wanted to change it from a fast car to a REALLY REALLY fast car. Know what I mean?? Let me know if you are interested. Josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

SmokeyDP · 01-20-2001, 01:11 PM

I have a stock H-pipe from a 91 GT. The cats are in good condition and my car passed emissions when they were on. Im not sure how much something like this would be to ship, but if you are interested email me at buono@optonline.net

------------------
1992 GT 5.0L Convertible
BBK Shorties
All Power
Super Chip
Mass Air

PROSVO351 · 01-20-2001, 01:31 PM

I have same equipment as Quick89gt with stock throttle body and heads. Let me know if interested.

------------------
88 Pro Street GT, 351 crate (385 hp), ported X heads, Novi 2000, Aftercooler, MAC 1 3/4" headers, AFM PMS/Powerpipe, #50 Holley inj., Triangle Eng cells, Paxton fuel system

LincoConti87 · 01-20-2001, 01:38 PM

I'm trying to keep up with all your posts

and I have e-mailed you all so far but if anyone has not received an e-mail from me
"squeaky81@aol.com" then send me one so I can reply to ya! thanks guys

------------------
Rob meister
89 Mercedes 190E 2.6
87 Lincoln Continental
Ex 86 Mercury Cougar

gray87GT · 01-20-2001, 01:38 PM

I also will have stock heads/intake/t.b. for sale.......but being from minnesota the shipping would be higher.

SmokeyDP · 01-20-2001, 03:03 PM

Anyone know the best place to go to ship an H-pipe? I dont want to get killed with shipping charges.

Scott

------------------
1992 GT 5.0L Convertible
BBK Shorties
Flowmasters
All Power
Super Chip

Rick 91GT · 01-20-2001, 03:23 PM

I sent you a e-mail

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

LincoConti87 · 01-20-2001, 04:25 PM

once again I e-mailed everyone who has responded to my original post. if you have not recieved an e-mail from me please e-mil me at "squeaky81@aol.com" or reply tyo the post again. Thanks!

mustang17 · 01-20-2001, 10:12 PM

What do you still need? I have lots of stuff.

------------------
1995 GT Black sleeper
Edelbrock 6037 heads,Edelbrock proformer intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter
Flowmaster cat-back, Eibach pro rate springs
lower control arms
3.73 gear Centerforce clutch

[This message has been edited by mustang17 (edited 01-20-2001).]

01-20-2001, 11:46 AM	#1
LincoConti87 Registered Member Join Date: Dec 2000 Location: Tallahassee,Florida,USA Posts: 188	Need stock HO parts Anyone know a good place I can find some stock HO parts? I need headers,exhaust,heads,upper and lower intake and some other stuff. Ebay never has anything useful.If anyone in here has some stuff sitting in the garage let me know. I would really like a cheap set of stock headers and maybe exhaust to slap on to a 87 150 horse 5.0 ------------------ Rob meister 89 Mercedes 190E 2.6 87 Lincoln Continental Ex 86 Mercury Cougar

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
polishing stock parts?	scale	Windsor Power	24	04-22-2002 11:57 AM
Stock Cam	gtsr515	Windsor Power	1	04-03-2002 10:28 PM
Question about stock cam specs	MustangGT1990	Windsor Power	11	04-03-2002 10:04 AM
Is a Ported Stock Intake Worth It?	Stang_Crazy	Windsor Power	9	09-28-2001 04:22 PM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

01-20-2001, 12:48 PM	#2
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	Linc: I have some stock headers, and a few other things just sitting in my garage after my exhaust over haul, the shop tossed my exhaust, but I have everything else. Just let me know if you want them, they are rusty, but very solid and would clean up with some work. I was keeping them in case I decided to sell my car, and keep my mods, but it would now cost me more to return to stock than to sell as is...Just write back in here, or via-e-mail...Thanks and good luck ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...just ordered some new Red alum pulley's. Doing some big shopping of late, I will keep you posted.

01-20-2001, 01:04 PM	#3
quick89gt Registered Member Join Date: Apr 2000 Location: O'Fallon, IL Posts: 243	Well, I have the stock upper and lower intakes off of my '89 Gt. I also have the stock heads off of my Gt. They have 117,000 miles on them, and are clean. I had no problems at all with the car when I rebuilt the motor..I just wanted to change it from a fast car to a REALLY REALLY fast car. Know what I mean?? Let me know if you are interested. Josh ------------------ *********************** '89 GT, T-5, Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears. ***********************

01-20-2001, 01:11 PM	#4
SmokeyDP Registered Member Join Date: Jun 1999 Location: Middlesex, NJ Posts: 212	I have a stock H-pipe from a 91 GT. The cats are in good condition and my car passed emissions when they were on. Im not sure how much something like this would be to ship, but if you are interested email me at buono@optonline.net ------------------ 1992 GT 5.0L Convertible BBK Shorties All Power Super Chip Mass Air

01-20-2001, 01:31 PM	#5
PROSVO351 Registered Member Join Date: Jun 1999 Location: Michigan Posts: 9	I have same equipment as Quick89gt with stock throttle body and heads. Let me know if interested. ------------------ 88 Pro Street GT, 351 crate (385 hp), ported X heads, Novi 2000, Aftercooler, MAC 1 3/4" headers, AFM PMS/Powerpipe, #50 Holley inj., Triangle Eng cells, Paxton fuel system

01-20-2001, 01:38 PM	#6
LincoConti87 Registered Member Join Date: Dec 2000 Location: Tallahassee,Florida,USA Posts: 188	I'm trying to keep up with all your posts and I have e-mailed you all so far but if anyone has not received an e-mail from me "squeaky81@aol.com" then send me one so I can reply to ya! thanks guys ------------------ Rob meister 89 Mercedes 190E 2.6 87 Lincoln Continental Ex 86 Mercury Cougar

01-20-2001, 01:38 PM	#7
gray87GT Registered Member Join Date: Jan 2001 Location: Minnesota Posts: 177	I also will have stock heads/intake/t.b. for sale.......but being from minnesota the shipping would be higher.

01-20-2001, 03:03 PM	#8
SmokeyDP Registered Member Join Date: Jun 1999 Location: Middlesex, NJ Posts: 212	Anyone know the best place to go to ship an H-pipe? I dont want to get killed with shipping charges. Scott ------------------ 1992 GT 5.0L Convertible BBK Shorties Flowmasters All Power Super Chip

01-20-2001, 03:23 PM	#9
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I sent you a e-mail ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

01-20-2001, 04:25 PM	#10
LincoConti87 Registered Member Join Date: Dec 2000 Location: Tallahassee,Florida,USA Posts: 188	once again I e-mailed everyone who has responded to my original post. if you have not recieved an e-mail from me please e-mil me at "squeaky81@aol.com" or reply tyo the post again. Thanks!

01-20-2001, 10:12 PM	#11
mustang17 Registered Member Join Date: Sep 2000 Location: Concord, MA, USA Posts: 264	What do you still need? I have lots of stuff. ------------------ 1995 GT Black sleeper Edelbrock 6037 heads,Edelbrock proformer intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter Flowmaster cat-back, Eibach pro rate springs lower control arms 3.73 gear Centerforce clutch [This message has been edited by mustang17 (edited 01-20-2001).]