Ram power grip clutch?

Coupe50h · 07-17-2003, 06:30 AM

Anyone ever had any experience with this clutch? is it worth the money, or should i just get a spec, or centerforce df? opinions? im threw with motorsport clutches and pp's.

bottlebaby91 · 07-18-2003, 12:55 AM

I am currently using a ram clutch. It has survived many many many 6,000rpm launches on slicks and has never given me any trouble. I have never used a centerforce before, but i have heard from a few people that have used them that the weights on the pressure plates fall off. Not a good thing. Mine had lastest until last night and it decided to slip while on spray, but I will be buying another.

Coupe50h · 07-18-2003, 03:32 AM

thanx, yea i heard the cf df will chatter too, but i never heard of the weight thiing.......i'll try the ram probaly, it seems my clutch stopped slipping, but im sure it'll start again when i rev it up.

07-17-2003, 06:30 AM	#1
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Ram power grip clutch? Anyone ever had any experience with this clutch? is it worth the money, or should i just get a spec, or centerforce df? opinions? im threw with motorsport clutches and pp's. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

07-18-2003, 03:32 AM	#3
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	thanx, yea i heard the cf df will chatter too, but i never heard of the weight thiing.......i'll try the ram probaly, it seems my clutch stopped slipping, but im sure it'll start again when i rev it up. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CLUTCH PROBLEMS (Fork??)	drewmp28	Windsor Power	6	07-18-2004 11:51 PM
clutch	lx5091	Windsor Power	10	09-13-2002 04:41 PM
bad clutch?	VeNuM	Windsor Power	7	08-19-2002 05:40 PM
Clutch problems from Atco raceway....HELP!..	RPM427	Windsor Power	12	08-13-2002 09:31 PM
4cyl clutch pedal vs 5.0 pedal?	WADS56	Windsor Power	5	02-05-2002 02:27 AM

07-18-2003, 12:55 AM	#2
bottlebaby91 Registered Member Join Date: Nov 2002 Posts: 141	I am currently using a ram clutch. It has survived many many many 6,000rpm launches on slicks and has never given me any trouble. I have never used a centerforce before, but i have heard from a few people that have used them that the weights on the pressure plates fall off. Not a good thing. Mine had lastest until last night and it decided to slip while on spray, but I will be buying another.