![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Mar 2004
Location: Long Island
Posts: 58
|
![]() ok , my cars been running like crap lately, it felt like it was really fat, untill i pulled a couple of plugs out today,
i drove around waiting for my car to start acting up, as soon as she started hesitating i cut her off, rolled on the side of the Rd. and started pullin plug, i expected to see my plugs fouled with gas on them, i saw the oppisite , they has white carbon all over them. so im runnin lean. ok heres my questions..... what would make me run lean ? i thought when a MAF of o2 sensor took a dump, it always lead u to a fat condition. i know that my baffel inside my gas tank is busted loose inside my tank, but thats been busted for years now. could that have anything to do with it ?? Will buying a A/F ratio gauge show me a lean condition if my fuel pump is goin , or if i have a couple of shitty injectors ?? i have about 15 degrees of timming into it. (i already tried putting a new distributor into it, and she still ran like shit) and about 28 psi goin throught the regulator (vaccume off) this hesitation isnt all the time, only sometimes, when i press about 1/4 down in the gas and i start to pass 2, 3 grand.. she starts popin and hesitating. what do u guys thinnk ?
__________________
1990 Mustang GT Engine- 308 (bored .40 over) Probe Forged pistons (10.5:1), Scat forged crank and rods, w/Main Girdle, AFR 185 heads, GT-40 intake, CSI electric water pump. AC delete kit, No smog pump, Manual rack and pinion steering. Ignition- MSD 6AL, MSD Blaster coil, MSD hellicore wires. Drive Train- Tremic 3550, Alum. Drive shaft, 3:73 gears, Stock carrier and axels. 26X11.5 M/T Et streets. Power adder- 175 shot of laughing gas. Best ET 11.5 @120mph on squeeze, 12.4 @109mph on muscle (on gt40 heads) on the 185 heads ... ??? tba |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Feb 2002
Location: Jacksonville, FL
Posts: 706
|
![]() I guess you don't have one of these.
It would help you troubleshoot a possible fp problem. At least it is cheap too. That is what I would look at given your info. Your ignition stuff looks more than adequate. I imagine with nitrous you gotta have an adjustable fpr. Just crank the fpr up a few psi and drive it around and look for white smoke, then your running rich. Then, back it off a couple of psi. A/F gauges are a rip-off imo. The only real a/f gauge would be one that is attached via individual thermocouple bungs in the header. Those multi-colored things are just not accurate enough. Good luck.
__________________
1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
![]() I think you should try more timing. You should be pushing as much timing as possible without detination (pinging). 15 already sounds like a good amount but I've heard of stangs running good with up to 18 and 19 degrees. Test and tune and a FPR is vital.
Last but not least, vacuum leaks, see if you can hook a vacuum gauge on and let us know what it reads at idle and how it performs when under load.
__________________
![]() |
![]() |
![]() |
![]() |
#4 | |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
![]() It definitely sounds like a fuel pressure issue to me.
Quote:
__________________
The sig says it all. ![]() |
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Mar 2004
Location: Long Island
Posts: 58
|
![]() i bumped the fuel preasure up to about 44 with the line off (it was at 38line off)
and the cars runnin 10000 times bettter, im gonna lower it alil bit and see what happens 44 sounds like alot to me. what do u guys think ? im runnin 24lb injectors with a gt40 intake with AFR-185's
__________________
1990 Mustang GT Engine- 308 (bored .40 over) Probe Forged pistons (10.5:1), Scat forged crank and rods, w/Main Girdle, AFR 185 heads, GT-40 intake, CSI electric water pump. AC delete kit, No smog pump, Manual rack and pinion steering. Ignition- MSD 6AL, MSD Blaster coil, MSD hellicore wires. Drive Train- Tremic 3550, Alum. Drive shaft, 3:73 gears, Stock carrier and axels. 26X11.5 M/T Et streets. Power adder- 175 shot of laughing gas. Best ET 11.5 @120mph on squeeze, 12.4 @109mph on muscle (on gt40 heads) on the 185 heads ... ??? tba Last edited by leathal injection; 09-22-2004 at 06:22 PM.. |
![]() |
![]() |
![]() |
#6 |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
![]() I'd probably back it down a few lbs. But if it takes 44 then just leave it there. Does it blow black smoke? Is it any harder to start?
__________________
The sig says it all. ![]() |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Aug 2002
Location: Rochester
Posts: 553
|
![]() It sound fine to me.. I was running 42-45 with my 24's as well.. car would run best with it and my plugs were still clean as new.
|
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Feb 2003
Location: Oshkosh WI
Posts: 69
|
![]() Hozer, So I should return my wideband O2 and replace it with EGT. I think the wideband in the way of tuning is the only way to go.
__________________
93 GT 306 DSS, O-Ringed, AFR 185's, Pro Products Intakes, 55lb low imp inj, 80mm Pro-M meter, 2004 PMS, AFM Power Pipe, Kirban Reg, Vortech S-Trim 14lbs. No times yet. Trying to tune. |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Feb 2002
Location: Jacksonville, FL
Posts: 706
|
![]() I wouldn't run any a/f indicator.
The only way I tune is on the dyno. Set it on the dyno and leave it alone.
__________________
1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Air/Fuel Ratio Question | xxxBlakexxx | Modular Madness | 2 | 02-18-2004 12:11 PM |
Another tire question | 96Saleen | Modular Madness | 6 | 02-10-2004 05:27 PM |
A stupid question I hate asking about exhaust sound | jwboner | Windsor Power | 4 | 08-05-2003 05:55 PM |
question for those w/ Air/Fuel meters | 93GTDIN | Windsor Power | 4 | 02-11-2003 01:22 AM |
simple question | Lonzo | Classic Mustangs | 3 | 09-10-2002 09:37 AM |