Nitrous Kits??

Smokedawg · 04-03-2001, 03:55 PM

I am now ready to purchase a nitrous kit to add to my combo. I have never had any experience with nitrous before? Such as what to buy and whats good. So my question is that I need to know if it will be safe to shoot a 125 shot through his motor. Also who sells a good kit at a reasonable price.

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, Holley Fuel Regulator, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

NOS_Notch · 04-03-2001, 11:03 PM

totally, completely , 100% safe to spray 125 on your setup. Perfectly safe to spray 125 on a stocker actually...as long as the pump and injectors are a little better than stock.
1/2 of your natural hp, is what is recommended. I like the dry kit from NOS....
That kit is about $480.
You may want a bottle warmer....about $120
and a blanket...$35
purge kit is not too necessary( i have one and don't even use it)$120 i think??
remote bottle valve would nice but $190 (get tired of going into the trunk all the time)
You should also run a guage that you can see....if the bottle is cold you may only make 600 psi....warm to hot could be 900-1000psi.
900 is optimal. you could lose about 30 hp from low pressure.

The dry kit can be jetted from 75-150.
But the 125+ settings require a shim that doesn't come w/ the stage 1 kit. (you can use a washer) so the stage 2 kit is not necessary for you.
you can do it by yourself in about 2 hours(maybe 3)
Also i've seen this kit selling used for as low as $200...usually about $250-$300 and sometimes get some of those extras w/ it.
used kit is perfectly safe....have fun...sorry so long.

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

04-03-2001, 03:55 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Nitrous Kits?? I am now ready to purchase a nitrous kit to add to my combo. I have never had any experience with nitrous before? Such as what to buy and whats good. So my question is that I need to know if it will be safe to shoot a 125 shot through his motor. Also who sells a good kit at a reasonable price. ------------------ 347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, Holley Fuel Regulator, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pro's and Con's: wet vs. dry nitrous kits	fiveohpatrol	Windsor Power	2	07-30-2002 11:09 PM
Anyone Using The Tnt Nitrous Kits?	LXHATCH	Windsor Power	0	01-12-2002 03:53 PM
Nitrous Kits	Neil	Windsor Power	3	11-14-2001 06:07 PM
I need a crash course in NITROUS ED	Dark_5.0	Windsor Power	7	07-12-2001 06:03 PM
NItrous Kits... Wet or Dry?!	Skyman	Windsor Power	8	05-07-2001 12:25 AM

04-03-2001, 11:03 PM	#2
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	totally, completely , 100% safe to spray 125 on your setup. Perfectly safe to spray 125 on a stocker actually...as long as the pump and injectors are a little better than stock. 1/2 of your natural hp, is what is recommended. I like the dry kit from NOS.... That kit is about $480. You may want a bottle warmer....about $120 and a blanket...$35 purge kit is not too necessary( i have one and don't even use it)$120 i think?? remote bottle valve would nice but $190 (get tired of going into the trunk all the time) You should also run a guage that you can see....if the bottle is cold you may only make 600 psi....warm to hot could be 900-1000psi. 900 is optimal. you could lose about 30 hp from low pressure. The dry kit can be jetted from 75-150. But the 125+ settings require a shim that doesn't come w/ the stage 1 kit. (you can use a washer) so the stage 2 kit is not necessary for you. you can do it by yourself in about 2 hours(maybe 3) Also i've seen this kit selling used for as low as $200...usually about $250-$300 and sometimes get some of those extras w/ it. used kit is perfectly safe....have fun...sorry so long. ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com