Is this normal?

my9250GT · 09-12-2003, 04:29 PM

I just started to remove the throttle body from my 92 and water started to shoot out what gives?

09-12-2003, 06:50 PM

So I take it you removed the EGR too...or it was at least loosened up since you were removing the TB. Your coolant lines are hooked up to the EGR...hence the water shootage.

my9250GT · 09-12-2003, 07:08 PM

Thanks after i got over the shock i followed the lines and sure enough it went to the water pump...i had just never look that close i guess.

09-12-2003, 04:29 PM	#1
my9250GT Registered User Join Date: Jan 2003 Location: Glendora CA. Posts: 56	Is this normal? I just started to remove the throttle body from my 92 and water started to shoot out what gives? __________________ 1992 Mustang GT, BBK equal length headers, Bassani X-pipe, Flowmaster 40 series, 3:73's, MAC cold air induction, Fluidyne aluminum radiator, Black Magic electric fan, 180*T-stat, Hurst shifter, Edelbrock 70mm TB & EGR, Eibach Drag springs w/ air bag, Edelbrock shocks, Tokico struts, MM adjustable LCA's, MM C/C plates, Not yet installed: Trick Flow engine kit (heads, cam, intakes..etc Pro-M 75mm MAF w/ 30lbs injectors, complete 5-lug 4 wheel disk brakes off a 94 Cobra and a Granetelli K-member w/ tubular A-arms) SOCALHORSEPOWER MEMBER

09-12-2003, 06:50 PM	#2
Simi Stang Guest Posts: n/a	EGR So I take it you removed the EGR too...or it was at least loosened up since you were removing the TB. Your coolant lines are hooked up to the EGR...hence the water shootage.

09-12-2003, 07:08 PM	#3
my9250GT Registered User Join Date: Jan 2003 Location: Glendora CA. Posts: 56	Thanks after i got over the shock i followed the lines and sure enough it went to the water pump...i had just never look that close i guess. __________________ 1992 Mustang GT, BBK equal length headers, Bassani X-pipe, Flowmaster 40 series, 3:73's, MAC cold air induction, Fluidyne aluminum radiator, Black Magic electric fan, 180*T-stat, Hurst shifter, Edelbrock 70mm TB & EGR, Eibach Drag springs w/ air bag, Edelbrock shocks, Tokico struts, MM adjustable LCA's, MM C/C plates, Not yet installed: Trick Flow engine kit (heads, cam, intakes..etc Pro-M 75mm MAF w/ 30lbs injectors, complete 5-lug 4 wheel disk brakes off a 94 Cobra and a Granetelli K-member w/ tubular A-arms) SOCALHORSEPOWER MEMBER

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Normal tach behavior?	Nixon1	Windsor Power	3	02-25-2003 10:43 PM
3.55:1 rear end noise, is it normal?	Mo65	Classic Mustangs	16	08-26-2002 08:07 AM
strange idle until car gets to normal temp.	9yellow3	Windsor Power	2	11-05-2001 02:09 AM
is this normal?	SPEEDY88	Windsor Power	4	03-18-2001 03:17 PM
Normal Temp gauge position	damills	Small Ponies	0	11-29-2000 11:29 PM