Tfs Cam

88workcar · 05-07-2005, 08:46 PM

How good is a stage 1, compaired to a E-303

Dark_5.0 · 05-07-2005, 09:00 PM

At most the difference between the E cam and any other off the shelf cam is 1 tenth.

The E303 cam is a pretty decent cam. I have a cammotion custom grind but I am in no hurry to install it.

The trick flow cam does hold idle better than the E303 though.

88workcar · 05-08-2005, 08:55 PM

A tenth? better or worse? I have the tfs, got it and the dist gear for $75.00

Dark_5.0 · 05-09-2005, 02:06 PM

Do it!!!!!

I would like to see the results.

I bet the difference between the 2 is negligable.

fiveOguy20 · 06-01-2005, 01:10 AM

buddy of mine gained 3 tenths when switching out E for tfs stage 1. id say go for it.

88workcar · 06-01-2005, 06:03 AM

I have been so confused, I ported some stock heads, and was gonna spay a motor till it blew. Grocerygetter said don't waist the time or motor, so I finished porting the hollys and will be putting the systemax set up on the car. With the tfs cam. Speed density, and 100hp shot. Later I will swap to mass air to see if it is better. And by then the 342 will be done.
On top of all this the 4 wheeler has gone a 6.44 @ 100.7 with a 1.41 60ft. And I am seeing a NEW Little mama, so I can care less about the car and the bike. She is badder than both of them together. 26 fine, sweet, and gorgeous.

05-07-2005, 08:46 PM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Tfs Cam How good is a stage 1, compaired to a E-303 __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-07-2005, 09:00 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Tfs Cam At most the difference between the E cam and any other off the shelf cam is 1 tenth. The E303 cam is a pretty decent cam. I have a cammotion custom grind but I am in no hurry to install it. The trick flow cam does hold idle better than the E303 though. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

05-08-2005, 08:55 PM	#3
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Tfs Cam A tenth? better or worse? I have the tfs, got it and the dist gear for $75.00 __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-09-2005, 02:06 PM	#4
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Re: Tfs Cam Do it!!!!! I would like to see the results. I bet the difference between the 2 is negligable. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

06-01-2005, 01:10 AM	#5
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	Re: Tfs Cam buddy of mine gained 3 tenths when switching out E for tfs stage 1. id say go for it. __________________ 347- ported X heads, Xcam , RPM air-gap intake, 650 holley DP, 10:5 comp., equal lenght shorties, pullies, MSD ignition, pro 5.0 shifter. stock fuel system !! best ET: 11.95 @113 1.64 60 foots

06-01-2005, 06:03 AM	#6
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Tfs Cam I have been so confused, I ported some stock heads, and was gonna spay a motor till it blew. Grocerygetter said don't waist the time or motor, so I finished porting the hollys and will be putting the systemax set up on the car. With the tfs cam. Speed density, and 100hp shot. Later I will swap to mass air to see if it is better. And by then the 342 will be done. On top of all this the 4 wheeler has gone a 6.44 @ 100.7 with a 1.41 60ft. And I am seeing a NEW Little mama, so I can care less about the car and the bike. She is badder than both of them together. 26 fine, sweet, and gorgeous. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.