Are Moser/Stange axles available in 28 spline?

skiwesser · 05-13-2007, 09:03 PM

If so are they strong enough for 11.00 or slower car?
I'm trying to keep my trac-loc and keep rebuiding it as the car sees little stip action, but I dump the clutch at 5000 on ET Streets and will soon hit it with 150 shot of gas after it's tuned for it ,although I'll probably hit gas after I shift to 2nd, until I can't resist leaving on it

I need to go soon it's getting warm arond here and I have no timeslips with new motor.

USMC302 · 05-14-2007, 10:12 PM

Yes, and yes.

ma84lx · 06-25-2007, 04:11 PM

I ran 28 spline Mosers in my 86 with a blown 331 to low 11's without any problems.. Was flashing the converter and cutting 1.6x sixty foots in a 3550# car. That was with the 28 spline moser axles and a rebuilt stock trac loc with the F-150 "S" spring..

05-13-2007, 09:03 PM	#1
skiwesser Registered Member Join Date: Sep 2000 Location: rock hill,S.C. 29730 Posts: 420	Are Moser/Stange axles available in 28 spline? If so are they strong enough for 11.00 or slower car? I'm trying to keep my trac-loc and keep rebuiding it as the car sees little stip action, but I dump the clutch at 5000 on ET Streets and will soon hit it with 150 shot of gas after it's tuned for it ,although I'll probably hit gas after I shift to 2nd, until I can't resist leaving on it I need to go soon it's getting warm arond here and I have no timeslips with new motor. __________________ 88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306. DYNO TUNED TO 300.97 RWHP 337RWTQ

05-14-2007, 10:12 PM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Are Moser/Stange axles available in 28 spline? Yes, and yes. __________________

06-25-2007, 04:11 PM	#3
ma84lx Wish-N 84 was done Join Date: Jun 2007 Location: Columbus GA Posts: 5	Re: Are Moser/Stange axles available in 28 spline? I ran 28 spline Mosers in my 86 with a blown 331 to low 11's without any problems.. Was flashing the converter and cutting 1.6x sixty foots in a 3550# car. That was with the 28 spline moser axles and a rebuilt stock trac loc with the F-150 "S" spring.. __________________ Mike 84 T-top Coupe project --&-- 97 GT cruiser ~~My small piece of the WWW...~~

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Limits of 28 spline axles	82 GT	Windsor Power	9	08-24-2006 07:19 PM
need 28 spline axles in So Cal	stng87	Windsor Power	3	02-19-2003 09:17 PM
Moser Axles Snapped In Two! Brand New!	12secAOD	Windsor Power	1	08-06-2002 09:14 AM
Who has best price on 31 spline axles?	8850	Windsor Power	4	04-22-2001 09:39 PM
28 vs 31 spline aftermarket axles?	DirtKing	Windsor Power	4	04-19-2001 08:25 AM