![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Apr 1999
Location: chesapeake va.
Posts: 89
|
![]() What is the correct step for checking the Mass air sensor. My car is falling on it face at 3/4 throttle, but runs fine below 3/4 throttle
306 xcam tfs head 14# procharger |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 1999
Location: chesapeake va.
Posts: 89
|
![]() can anybody help!?!?!?!!!!!!!!!!!!!!!???
|
![]() |
![]() |
![]() |
#3 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() Do a code scan.
Look for 26 (bad MAF) or possibly 56 or 66 (MAF too high or too low). There are other tests but you need more sophisticated equipment. If it throws a MAF code, replace the sensor. Meanwhile, a careful cleaning of the MAF hotwire (disconnect battery first, let the wire cool and use a Q-tip moistened with alcohol to clean it, being very gentle) may help, if it's at all contaminated. |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Mar 2002
Location: Lakewood, Wa
Posts: 161
|
![]() Mr 5.0
If it throws a MAF code replace it? Igot the code that said MAF signal low . So should I replace the MAF
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro |
![]() |
![]() |
![]() |
#5 |
dude5l
Join Date: May 2001
Location: Grande Prairie, Alberta, Canada
Posts: 603
|
![]() Its probably not your MAF as it does not read throttle position, only the mass of air that is flowing into the engine. Have you checked your TPS?
__________________
Good luck! Brad R. 1992 L.X. 5.0 coupe MODS: A few little bolt ons ![]() New Best time ...11.60 @ 128 mph @ 2000+ ft altitude. Rice Haters Club member #39 Users rides #2542 |
![]() |
![]() |
![]() |
#6 |
motors done......woohooo
Join Date: Mar 2002
Posts: 799
|
![]() actually, the mass air and the tps work together. i have had mass airs go bad on 3 of my mustangs, and 3 of my buddys stangs. that was the problem with all of them. actually just fixed one yesterday on a 92lx, the car wouldnt get out of its own way, then when we replaced the mass air, it screamed like a 12 yr. old at a backstreet boys concert.
|
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Mar 2002
Location: Lakewood, Wa
Posts: 161
|
![]() "like a 12 yr old at a backstreet boys concert"
hahahahahaha
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro |
![]() |
![]() |
![]() |
#8 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() Kenneth:
I recommended replacing the MAF sensor as the quick and easy way of resolving the problem but of course it's expensive. I assume you've already checked the TPS voltage for a steady climb as you open the throttle to max (engine off) and it's normal, right? If so, put the MAF put on a tester and check the current output. In the case of a failed MAF sensor, the computer (ECM) will go to a backup strategy, using the TPS signal to create a MAF signal of its own. That's why you need a full array of test equipment to check all aspects of the MAF/TPS operation. A good shop will have this equipment and know how to use it. It shouldn't cost too much (under $75.) to have it done. There's a good chance the MAF sensor is defective but of course I have no way to guarantee that it is. Just making semi-educated guesses, from a distance, without any equipment and trying to at least point you in the right direction. |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Apr 1999
Location: chesapeake va.
Posts: 89
|
![]() thanks guys, I well scan the car for code today. I well let, you guys know what comes up.
ken |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mass Air Sensor | 91redgt | Windsor Power | 1 | 10-18-2003 11:31 PM |
I got a free mass air sensor | stevstum | Windsor Power | 2 | 05-27-2003 12:50 PM |
mass air sensor question | whitepony91 | Windsor Power | 4 | 07-04-2002 01:40 PM |
mass air sensor | 89-5oh | Windsor Power | 1 | 05-20-2002 11:15 AM |
new mass air sensor problems | crazy5.0 | Windsor Power | 6 | 11-08-2001 07:32 AM |