Help on fender problems!!!!

87prjctpony · 09-12-2005, 06:08 PM

I have my 87's front right side of the apron assembly mest up really bad (accident), and the radiator supprt is bad to.. i called a company that i saw on there web site that they solled these parts but when i called they tolled me that those parts where discontinued>> Shit!!!! If you guys could send me some options i might have i would really appreciate it!!!

~The Jester~ · 09-13-2005, 12:15 AM

Goodmark, or junkyard are about your only 2 options.

What exactly do you need? I have 11 fox bodies sitting at my shop, might be able to hook you up.

87prjctpony · 09-13-2005, 01:08 AM

man your awsome... i would need the passenger side fender apron and the front radiator support.!! I would go to the junk yard cuzz ther are alot of fox bodies there but i dont have the tools to take off the parts i need...! If you had these parts i would be more than glad to buy them off you! What is goodmark by the way???

~The Jester~ · 09-13-2005, 04:51 PM

I just checked for ya, Goodmark doesn't have anything for ya. Their a restoration parts supplier.

I just realized that you're in CA, it'd cost BIG BUCKS to ship this stuff from Ohio.

Some of the junkyards around here will take the stuff off for you. Maybe make a couple calls, and see if they'll yank it.

87prjctpony · 09-14-2005, 09:16 PM

Well I Just Ordered The Parts From Johns Mustangs In Houston For A Pretty Good Deal...should Be Getting Them Tues!!! Thanks For Your Help Tho!!

~The Jester~ · 09-14-2005, 09:20 PM

No prob bro!

tarmon8r · 09-15-2005, 02:33 PM

you need a mig welder, air, grinders. Make sure the front end is square before you remove the front core support. Measure left rear fender bolt to front right and the right rear to front left. they should be within 2 mm. you wanna measure the diagnal. Im worried that your front is swayed to one side and after cutting the old one out, you will have a hell of a time getting it square again so your fender and hood line match up.

87prjctpony · 09-16-2005, 12:54 AM

well im taking it to da shop for that!!

09-12-2005, 06:08 PM	#1
87prjctpony 87prjctpony Join Date: Aug 2005 Location: seaside ca Posts: 57	Help on fender problems!!!! I have my 87's front right side of the apron assembly mest up really bad (accident), and the radiator supprt is bad to.. i called a company that i saw on there web site that they solled these parts but when i called they tolled me that those parts where discontinued>> Shit!!!! If you guys could send me some options i might have i would really appreciate it!!! __________________ i have a 87 5.0 gt with mac shorty headers, off-road h-pipe, mac mufflers, transgo shift kit, msd blaster coil, and 3.73 gears. o yeah aod tranny.

09-13-2005, 12:15 AM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Help on fender problems!!!! Goodmark, or junkyard are about your only 2 options. What exactly do you need? I have 11 fox bodies sitting at my shop, might be able to hook you up. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

09-13-2005, 01:08 AM	#3
87prjctpony 87prjctpony Join Date: Aug 2005 Location: seaside ca Posts: 57	Re: Help on fender problems!!!! man your awsome... i would need the passenger side fender apron and the front radiator support.!! I would go to the junk yard cuzz ther are alot of fox bodies there but i dont have the tools to take off the parts i need...! If you had these parts i would be more than glad to buy them off you! What is goodmark by the way??? __________________ i have a 87 5.0 gt with mac shorty headers, off-road h-pipe, mac mufflers, transgo shift kit, msd blaster coil, and 3.73 gears. o yeah aod tranny.

09-13-2005, 04:51 PM	#4
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Help on fender problems!!!! I just checked for ya, Goodmark doesn't have anything for ya. Their a restoration parts supplier. I just realized that you're in CA, it'd cost BIG BUCKS to ship this stuff from Ohio. Some of the junkyards around here will take the stuff off for you. Maybe make a couple calls, and see if they'll yank it. __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

09-14-2005, 09:16 PM	#5
87prjctpony 87prjctpony Join Date: Aug 2005 Location: seaside ca Posts: 57	Re: Help on fender problems!!!! Well I Just Ordered The Parts From Johns Mustangs In Houston For A Pretty Good Deal...should Be Getting Them Tues!!! Thanks For Your Help Tho!! __________________ i have a 87 5.0 gt with mac shorty headers, off-road h-pipe, mac mufflers, transgo shift kit, msd blaster coil, and 3.73 gears. o yeah aod tranny.

09-14-2005, 09:20 PM	#6
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Help on fender problems!!!! No prob bro! __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

09-15-2005, 02:33 PM	#7
tarmon8r Registered Member Join Date: Jun 2002 Location: manassas, va Posts: 186	Re: Help on fender problems!!!! you need a mig welder, air, grinders. Make sure the front end is square before you remove the front core support. Measure left rear fender bolt to front right and the right rear to front left. they should be within 2 mm. you wanna measure the diagnal. Im worried that your front is swayed to one side and after cutting the old one out, you will have a hell of a time getting it square again so your fender and hood line match up. __________________ 1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided

09-16-2005, 12:54 AM	#8
87prjctpony 87prjctpony Join Date: Aug 2005 Location: seaside ca Posts: 57	Re: Help on fender problems!!!! well im taking it to da shop for that!! __________________ i have a 87 5.0 gt with mac shorty headers, off-road h-pipe, mac mufflers, transgo shift kit, msd blaster coil, and 3.73 gears. o yeah aod tranny.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what if any problems with your Modular Model Gt/Cobra?	fixer	Modular Madness	18	04-03-2005 09:18 AM
HELP: Problems after Paxton Novi 1000 install	Meatman	Windsor Power	3	10-17-2002 06:03 PM
are 92 and 93 fender wells bigger like the fender?	fantozi	Windsor Power	1	09-28-2001 11:56 PM
Rolled fender lips?	autoX	Windsor Power	8	06-27-2001 04:00 PM
'87-'90 inner fender vs. '91-93' Inner fender	RMARIANI	Windsor Power	9	06-23-2001 08:09 PM