MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rating: Thread Rating: 1 votes, 5.00 average. Display Modes
Old 06-30-2005, 04:58 PM   #1
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Shakedown Cruise

Well, thrashed on the car last week to get it done for Fun Ford. Then I decided after what happened last year, that I wanted to take the car out somewhere BEFORE FFW. So, Monday I test fired the motor, and found out I have throwout bearing issues. Called RAM, and got the part # for the correct one. Tuesday I worked on 2 trucks at my shop, then ran to Summit around 5:00. Got home around 7:00, threw down some dinner, and had the car back together with the new throwout bearing at midnight. Wed morning, I redid my exhaust hangers, and took the car around the block. Loaded her up, and hauled azz to Dragway 42 for the shakedown.

RIGHT OFF THE TRAILER after 2 years apart, she went a 12.29 @ 115, with an idiot trying to shift gears in a pro-shifted tranny for the first time. Readjusted the vavles, checked plugs, checked timing. charged battery (alt issues) Then I found out that the street class up there is only allowed to go 12.00 or slower. Soooo, I dialed in at 12.00 for first round, and I was gonna let it rip and breakout, go home. By this time it's 11:30 at night, and I'm over an hour from home. Ran 12.13 @ 105 on the brakes, decided I wanted to win instead. Back to the pits, charged the battery. Didn't have enough time to fully charge it before 2nd round, so I decided this was it. Ran 11.9001 @ 118.42 for the breakout loss. hehehehe

Sorry for the long story, but I wanted to share. Knew you'd all be happy to hear about it. Car DEFINITELY has more in it, it'll go 10.90 after I spray some Raid in there and get rid of all the bugs!
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 07-01-2005, 11:03 PM   #2
HotRoddin
cranky old man
 
HotRoddin's Avatar
 
Join Date: Sep 2001
Location: Longview Texas
Posts: 683
Default Re: Shakedown Cruise

Quote:
Originally Posted by ~The Jester~
Well, thrashed on the car last week to get it done for Fun Ford. Then I decided after what happened last year, that I wanted to take the car out somewhere BEFORE FFW. So, Monday I test fired the motor, and found out I have throwout bearing issues. Called RAM, and got the part # for the correct one. Tuesday I worked on 2 trucks at my shop, then ran to Summit around 5:00. Got home around 7:00, threw down some dinner, and had the car back together with the new throwout bearing at midnight. Wed morning, I redid my exhaust hangers, and took the car around the block. Loaded her up, and hauled azz to Dragway 42 for the shakedown.

RIGHT OFF THE TRAILER after 2 years apart, she went a 12.29 @ 115, with an idiot trying to shift gears in a pro-shifted tranny for the first time. Readjusted the vavles, checked plugs, checked timing. charged battery (alt issues) Then I found out that the street class up there is only allowed to go 12.00 or slower. Soooo, I dialed in at 12.00 for first round, and I was gonna let it rip and breakout, go home. By this time it's 11:30 at night, and I'm over an hour from home. Ran 12.13 @ 105 on the brakes, decided I wanted to win instead. Back to the pits, charged the battery. Didn't have enough time to fully charge it before 2nd round, so I decided this was it. Ran 11.9001 @ 118.42 for the breakout loss. hehehehe

Sorry for the long story, but I wanted to share. Knew you'd all be happy to hear about it. Car DEFINITELY has more in it, it'll go 10.90 after I spray some Raid in there and get rid of all the bugs!
Exxxxcellent
__________________
Under Construction: 64 Falcon 372 cu in. stroker 1:72 rod ratio 6.250" rods (long rod), Comp Cams XE274 230/236 520/526 @ .050, Scorpion Rollers, Roush 200 irons, 10:1 Keith Blacks, Hedman long tubes, 750 Holley DP, Edelbrock Victor Jr., C4 3500 stall, gears and tires to be anounced.
HotRoddin is offline   Reply With Quote
Old 07-03-2005, 11:36 PM   #3
82 GT
Import Slayer
 
82 GT's Avatar
 
Join Date: May 1999
Posts: 2,241
Default Re: Shakedown Cruise

Quote:
Originally Posted by ~The Jester~
, it'll go 10.90 after I spray some Raid in there and get rid of all the bugs!
Are you implying that you plan on running nitrous?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.
82 GT is offline   Reply With Quote
Old 07-04-2005, 05:42 AM   #4
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Shakedown Cruise

Eh, not yet. I meant getting all the stupid little stuff tuned. Haven't TOUCHED the carb or distributor yet, think I also have a bad fuel pressure regulator. Changing the clutch cable, LEARN HOW TO SHIFT IT , etc etc. And a GOOD tune. That kinda stuff.

Might spray it later, the cheater system is already on the car. It has "hyper" pistons in it though, so I'll go easy with the squeeze if I do.
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 07-04-2005, 09:06 AM   #5
82 GT
Import Slayer
 
82 GT's Avatar
 
Join Date: May 1999
Posts: 2,241
Default Re: Shakedown Cruise

Oh..I see now. Hey, can you spray a little of that D-con stuff on my engine so it will run 12's like it's supposed to?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.
82 GT is offline   Reply With Quote
Old 07-07-2005, 07:47 PM   #6
Ieatcamaros
Domestic Rice really sucks!
 
Ieatcamaros's Avatar
 
Join Date: Apr 2002
Location: KY
Posts: 973
Default Re: Shakedown Cruise

That's much better than last year, Jester. Congrats on the 11.90! Are you gonna run any NMRA races?
__________________
The sig says it all.
Ieatcamaros is offline   Reply With Quote
Old 07-11-2005, 08:28 AM   #7
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Shakedown Cruise

Just got back from Fun Ford Weekend! WOOO HOOO! 11.262 @ 121.29 MPH!!!!! This Mo-Fugger RIPS!

Hurt the motor a smidge, bent a pushrod and screwed up a rocker and guide plate. Gotta pay attention to that shift light, bug dummy! Not a bad fix though.

We're talking about hitting NMRA in Columbus, gotta check up on the rule book and see where I fit in though.
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 07-11-2005, 05:52 PM   #8
82 GT
Import Slayer
 
82 GT's Avatar
 
Join Date: May 1999
Posts: 2,241
Default Re: Shakedown Cruise

Congrats!!
What is your new setup now?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.
82 GT is offline   Reply With Quote
Old 07-12-2005, 08:50 AM   #9
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Shakedown Cruise

Simple setup! 347 stock block, FRPP bottom end with a girdle. Flat top KB hypers (icky) Edelbrock Victor Jr intake, Holley 750, killer Cam Motion cam, prototype Canfield Heads, little pee-pee 1 5/8" headers with little pee-pee 2 1/2" exhaust. Ram clutch, soon to be Pro-Motion Kevlar, Tremec TKO II proshifted by Pro-Motion. Aluminum FRPP driveshaft, 4.30 gears on a stock Exploder posi carrier with 31 spline Strange axles. Big nasty fuel system. Did my homework on the fuel system, and trust me it's worth it!

Not sure why this sucker screams like it does, but I was shifting at 7,500 and she was still pulling HARD! I got in-car footage from FFW, just have to figure out how to get it from the camera to my compooper, then you guys can see the show.

I'm frigginn' ecstatic about this car! Better than I ever imagined! Thanks for all the congrats guys!!!

Time to go Mouse Hunting!!! Maybe even a Rat or two.....
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Old 07-12-2005, 05:58 PM   #10
Ieatcamaros
Domestic Rice really sucks!
 
Ieatcamaros's Avatar
 
Join Date: Apr 2002
Location: KY
Posts: 973
Default Re: Shakedown Cruise

Jester, what class did you run in at FFW?
__________________
The sig says it all.
Ieatcamaros is offline   Reply With Quote
Old 07-12-2005, 07:29 PM   #11
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Shakedown Cruise

I ran Quick Ford at FFW, I'm under the impression that NMRA is all radial tires. In which case I gotta go but some. ???

Here's the in-car footage. Forgive the huge bog, but figured that out on the next pass. This was only my 4th pass in the car, so I was still seeing where she wanted shifted at. Not a great video, but you'll get the idea. Can't see the boards, but this particular pass was 11.41 @ 118.63
http://www.knights-rule.com/mpgs/LuckyInCar2.WMV
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....


Last edited by ~The Jester~; 07-15-2005 at 06:43 AM..
~The Jester~ is offline   Reply With Quote
Old 07-13-2005, 12:05 AM   #12
rwhite65
Ride Hard
 
rwhite65's Avatar
 
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
Default Re: Shakedown Cruise

Jester,
Man, u r making me very jealous!
Ryan
__________________
65 Fastback 91 roller 306, H/C/I
AOD-Bauman, PI Stallion, 4.10's and traction loc

04 Grand Cherokee Freedom Edition

79 Ford F-250 4x4 - Restored
rwhite65 is offline   Reply With Quote
Old 07-13-2005, 12:10 AM   #13
rwhite65
Ride Hard
 
rwhite65's Avatar
 
Join Date: Oct 2000
Location: Wyoming IL
Posts: 1,094
Default Re: Shakedown Cruise

U know, now that I think about it, I wanna hear more about this fuel system.
Ryan
__________________
65 Fastback 91 roller 306, H/C/I
AOD-Bauman, PI Stallion, 4.10's and traction loc

04 Grand Cherokee Freedom Edition

79 Ford F-250 4x4 - Restored
rwhite65 is offline   Reply With Quote
Old 07-13-2005, 01:03 AM   #14
~The Jester~
Rat Killer
 
~The Jester~'s Avatar
 
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
Default Re: Shakedown Cruise

Found this pic from FFW. 11.41 pass

Fuel system, Hmmmm. Whatcha wanna know? Sump, -12 to the Product Engineering filter, -12 to the BG400 pump, -8 return right off the pump, -10 up to the front of the car, into a Magnafuel fuel log. 2 Magnafuel 2 port regulators, 2 -6's up to the carb, and -3 returns from the regulators to a Y block, then -6 back to the tank.
__________________
d-Con Racing
"Nothing fancy, just 347 inches of RAT POISON!"

MICE need not apply.....

~The Jester~ is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
In the NUT SHELL Topless In Texas Blue Oval Lounge 9 03-19-2005 01:02 AM
ITs A GO! Dec. 11th Holiday Cruise night with the X-CFM and ODG! Orlando Fl. Z28Autobot Ford Show & Go 0 12-08-2004 10:51 PM
Woodward Dream Cruise - 2003 drudis Ford Show & Go 0 07-24-2003 08:53 AM
World Ford Challenge Cruise to St. Louis dbrown Ford Show & Go 0 05-05-2003 01:12 AM
keepin it cruise control Rodoggx Windsor Power 1 02-10-2003 01:39 PM


All times are GMT -5. The time now is 10:35 AM.


SEARCH