water pump inlets

QuantumMotorsports · 12-26-2003, 11:41 PM

Okay, correct me if I'm wrong, but all of the hoses going onto the water pump are inlets, correct? The only outlets go into the block and up out of the thermotstat housing into the radiator right? Reason I ask is, I have no heater core, so i need to plug one of the tubes, if it's an inlet, I'll just cap it with a rubber cap. Thanks.

420nitro · 12-26-2003, 11:53 PM

You're right...cap that inlet. (the 5/8 inlet pipe) Theres two of them the top one goes to the thermostate bypass and the bottom one goes to the heater core.
Hope this helps.

12-26-2003, 11:41 PM	#1
QuantumMotorsports Registered Member Join Date: Jul 2000 Location: Norman, Oklahoma, USA Posts: 597	water pump inlets Okay, correct me if I'm wrong, but all of the hoses going onto the water pump are inlets, correct? The only outlets go into the block and up out of the thermotstat housing into the radiator right? Reason I ask is, I have no heater core, so i need to plug one of the tubes, if it's an inlet, I'll just cap it with a rubber cap. Thanks. __________________ Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
standard rotation water pump	QuantumMotorsports	Windsor Power	3	07-21-2003 10:55 AM
STEWART Water Pump issues :( ??	LOBE_50	Windsor Power	6	05-15-2002 08:34 AM
HP gains from electric water pump?	exgmguy	Windsor Power	13	09-28-2001 02:46 AM
Water pump....AC Bracket problem	Jimmy Page	Classic Mustangs	3	07-28-2001 01:54 PM
Pulleys, water pump, and fan clutch	dinomite	Windsor Power	5	05-26-2001 09:00 AM

12-26-2003, 11:53 PM	#2
420nitro Registered Member Join Date: Nov 2003 Location: Rockford Posts: 596	You're right...cap that inlet. (the 5/8 inlet pipe) Theres two of them the top one goes to the thermostate bypass and the bottom one goes to the heater core. Hope this helps.