stock fuel gauge w/fuel cell

sn95gt19 · 01-06-2003, 02:32 AM

i am thinking about running a 12 gal fuel cell in my 95 but i have not seen a sending unit for any cell. do they make sending units for the fuel cells that would allow me to use my stock fuel level guage?

saltzstang · 01-06-2003, 11:31 AM

I have seen sending units for Rci fuel cells. Level gauges work on an Ohm scale...been so long since I messed w/mine but if I remember right it was a three wire potentiometer syle ( hope you have a Dvm and know a little about electronics)!

saltzstang · 01-06-2003, 11:34 AM

sorry...Dvm= digital voltmeter

sn95gt19 · 01-06-2003, 11:35 AM

actually i was looking for something more along the lines of

"plug and play"

i dont know if thats going to be possible with what im trying to acheive. i might just go with the sump kit, that way i wont have to mess with any of that, and ill be able to use the stock sending unit.

saltzstang · 01-06-2003, 12:23 PM

Ok... Ive only seen chevy style sending units for f/c's......

01-06-2003, 02:32 AM	#1
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	stock fuel gauge w/fuel cell i am thinking about running a 12 gal fuel cell in my 95 but i have not seen a sending unit for any cell. do they make sending units for the fuel cells that would allow me to use my stock fuel level guage? __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

01-06-2003, 11:31 AM	#2
saltzstang Registered Member Join Date: Sep 2002 Location: southeast texas Posts: 90	I have seen sending units for Rci fuel cells. Level gauges work on an Ohm scale...been so long since I messed w/mine but if I remember right it was a three wire potentiometer syle ( hope you have a Dvm and know a little about electronics)! __________________ AFR 1492 heads,Track Heat Intake, d.s.s super pro bullet 331, lakewood bell, king cobra, 3550 ,UPR shifter, aluminum shaft, 4.10, 31-spline, spool,hoosier27x10, moroso ds-2, 175-juice, egt...11.40 on motor spray pass coming.

01-06-2003, 11:34 AM	#3
saltzstang Registered Member Join Date: Sep 2002 Location: southeast texas Posts: 90	sorry...Dvm= digital voltmeter __________________ AFR 1492 heads,Track Heat Intake, d.s.s super pro bullet 331, lakewood bell, king cobra, 3550 ,UPR shifter, aluminum shaft, 4.10, 31-spline, spool,hoosier27x10, moroso ds-2, 175-juice, egt...11.40 on motor spray pass coming.

01-06-2003, 11:35 AM	#4
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	actually i was looking for something more along the lines of "plug and play" i dont know if thats going to be possible with what im trying to acheive. i might just go with the sump kit, that way i wont have to mess with any of that, and ill be able to use the stock sending unit. __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

01-06-2003, 12:23 PM	#5
saltzstang Registered Member Join Date: Sep 2002 Location: southeast texas Posts: 90	Ok... Ive only seen chevy style sending units for f/c's...... __________________ AFR 1492 heads,Track Heat Intake, d.s.s super pro bullet 331, lakewood bell, king cobra, 3550 ,UPR shifter, aluminum shaft, 4.10, 31-spline, spool,hoosier27x10, moroso ds-2, 175-juice, egt...11.40 on motor spray pass coming.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Air Fuel Ratio Gauge problems	88fivepointoh	Windsor Power	8	06-07-2003 12:56 AM
fuel gauge problem	88fivepointoh	Windsor Power	3	05-15-2003 06:30 AM
where can i get stock fuel lines !!!!!!	darkside351	Blue Oval Lounge	2	04-27-2001 12:29 PM
Fuel and Vaccuum Gauge Mounting	95Convert	Windsor Power	3	02-10-2001 10:10 PM
Fuel Pressure Gauge	86GT	Windsor Power	6	02-07-2001 11:55 PM