MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-03-2006, 09:57 PM   #1
mark sweetser
96GREENGT
 
Join Date: Mar 2005
Location: las vegas
Posts: 51
Default block coolant drain

hey, where is the coolant drain plug for the block on an '87 5.0 HO? also heard them called freeze plugs. call me a dumbass, i can't find it/them. my car is running HOT out here in Vegas....already swapped the thermostat, no change...temp guage acts as if thermostat is slow to open, or gets stuck closed for a while....temp gauge damn near maxxes out to red. when i drained my coolant from radiator, only a few ounces came out. the car was run 3 hours prior w/ temp gauge skyrocketing. could i have a blocked radiator? i was gonna do a rad flush to see if i could flush the crap out, if any...but can't find block drain plug(s). help?
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction
-'87 Black LX 5.0
BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs
mark sweetser is offline   Reply With Quote
Old 08-04-2006, 06:26 AM   #2
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Default Re: block coolant drain

You dont want to pull the freeze plugs unless you pull the engine. They're along the side of the block.
Mine used to overheat like that because the radiator was plugged. Flushing only cleans so much.. easier to just replace it. Did you replace the thermostat and put it in backwards? Water leak anywhere?

After you changed the thermostat, did you start it and fill it more?
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 08-10-2006, 06:48 PM   #3
mark sweetser
96GREENGT
 
Join Date: Mar 2005
Location: las vegas
Posts: 51
Default Re: block coolant drain

thanks for getting back to me. i installed the thermostat w/ the spring side toward the block, this is how the old one was. is this correct? does the gasket go on, then the thermostat...or is it the other way around? i skipped the flush and changed to a new radiator, since old one looked original. NO CHANGE, damnit! still runs hot. no water leaks anywhere. water pump isn't leaking from the seep hole, no play in the shaft. however, there is a slight whine noise coming from front of block area. what about the fan? how do you diagnose a fan problem? it spins freely at all times, no bent/damaged blades. fan shroud is good. thoughts?
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction
-'87 Black LX 5.0
BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs
mark sweetser is offline   Reply With Quote
Old 08-11-2006, 06:28 AM   #4
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Default Re: block coolant drain

Hot on the temp guage, or boiling over? Put a new radiator cap on? Check the plugs to see if it's to lean?
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 08-11-2006, 06:54 PM   #5
mark sweetser
96GREENGT
 
Join Date: Mar 2005
Location: las vegas
Posts: 51
Default Re: block coolant drain

hot, but not boiling over. i just changed the plugs 2 months ago, it failed emissions...so i changes the plugs and O2 sensors, passed. plug gap is as specified, .050 i think it was. i'll pull a few, but what will they look like if motor is lean?
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction
-'87 Black LX 5.0
BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs
mark sweetser is offline   Reply With Quote
Old 08-11-2006, 06:58 PM   #6
mark sweetser
96GREENGT
 
Join Date: Mar 2005
Location: las vegas
Posts: 51
Default Re: block coolant drain

i'll swap the radiator cap and try...if that doesn't do anything, i'll change water pump. it is whiny. at least sound seems to be coming from there.
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction
-'87 Black LX 5.0
BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs
mark sweetser is offline   Reply With Quote
Old 08-11-2006, 08:20 PM   #7
Dark Knight
Registered Member
 
Dark Knight's Avatar
 
Join Date: Oct 1998
Location: Az
Posts: 854
Default Re: block coolant drain

If the guage stays low, then shoots up, it usually means that the radiator is low, or there is an air pocket. One thing you might check is for a blown head gasket too..there's a dye you can get that tells you if there are combustion gasses in the radiator.
Does it cool off when you drive, or does it stay the same?
__________________
84 convt,roller 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-)
http://members.cox.net/darkknight302/68nwrear.jpg
Dark Knight is offline   Reply With Quote
Old 08-11-2006, 10:15 PM   #8
mark sweetser
96GREENGT
 
Join Date: Mar 2005
Location: las vegas
Posts: 51
Default Re: block coolant drain

after engine start-up temp will rise to mid-range, and keep creeping all the way up to about 250-260 deg where it will hang for a few minutes (about 3) then will come down into the mid range (about 200 deg). if at a stop/idle, temp will shoot back up to 250-260. giving it gas to make rpm's climb at a stop will bring it back down some (about 220). once driving again w/ normal rpm's, temp stays in mid-normal range. after swapping thermostat and radiator, if i leave idle after engine start and motor was cool, ...temp will stay dead center (i let it run for 10 minutes, it was like a rock)...where as before, it would skyrocket at idle. however, as soon as you get it on the road, temp climbs. WTF?
__________________
-'96 GTS Deep Forest Green Metallic- 8#Powerdyne,Bassani Cat-X,2 chamber Flows, FMS alum. DS,Kenne Brown subframes,Pro 5.0 short throw,FRPP 3.73's,Accufab Plenum/75mm TB,11# blower pulley,Bassani mid headers,Eibach 1.5" springs,17" Cobra R's w/ 275/40zr-17 g-force kd's,Centerforce Dual Friction
-'87 Black LX 5.0
BBK shorties&Cat-X,2 chamber Flows,MSD ign,stock 3.08's,MGW short-throw,BBK cold-air,King Cobra clutch,235/55-17(F)&255/50-17(R) Kumho Ecsta's on 95 Cobra R 4-lugs
mark sweetser is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cast Iron Block Welding - 427FE Unit 5302 Blue Oval Lounge 10 04-14-2006 05:29 PM
Need help deciding on an engine block!! 93 Cobra needs input Windsor Power 6 10-23-2002 05:29 PM
What makes a Small block a Small block and a Big Block a big block? gtsr515 Windsor Power 13 05-20-2002 10:25 PM
Coolant Low...Coolant Odor....D@MN! abesmith69 Windsor Power 6 12-27-2001 10:28 AM
do i have to drain all coolant to replace thermostat? SHaFT7 Windsor Power 4 05-07-2001 05:24 PM


All times are GMT -5. The time now is 08:36 PM.


SEARCH