Deceleration vibration

331stroker · 02-03-2008, 08:47 PM

I recently noticed at about 75-90 I have serious vibration on deceleration. I replaced the u-joints and still does it. When I replaced the u-joints all 4 of my DS bolts were finger tight. I also noticed that I can twist my DS about 3/8 of an inch each way before the tires turn it may be more like 3/4 in. any info would be great

USMC302 · 02-04-2008, 01:17 PM

Is it an aluminum driveshaft? What kind of hormanic balancer are you running?

331stroker · 02-04-2008, 09:41 PM

factory drive shaft not sure on the harmonic balancer

USMC302 · 02-04-2008, 10:18 PM

The stock balancers are crap IMO, they have a rubber seal that comes out over time and will be visible if it is, this will throw everything off balance, put a nice balancer and an aluminum DS on and your vibs will go away. The stock DS's aren't balanced to well either. Good luck.

02-03-2008, 08:47 PM	#1
331stroker Registered Member Join Date: May 2007 Posts: 10	Deceleration vibration I recently noticed at about 75-90 I have serious vibration on deceleration. I replaced the u-joints and still does it. When I replaced the u-joints all 4 of my DS bolts were finger tight. I also noticed that I can twist my DS about 3/8 of an inch each way before the tires turn it may be more like 3/4 in. any info would be great __________________ 1990 Lx 331 stroker, Holly System max 2, 190lph fuel pump, 30lb injectors,76mm mass air meter calibrated to the 30lb (i think?), long tube headers off-road h-pipe with glasspacks

02-04-2008, 01:17 PM	#2
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Deceleration vibration Is it an aluminum driveshaft? What kind of hormanic balancer are you running? __________________

02-04-2008, 09:41 PM	#3
331stroker Registered Member Join Date: May 2007 Posts: 10	Re: Deceleration vibration factory drive shaft not sure on the harmonic balancer __________________ 1990 Lx 331 stroker, Holly System max 2, 190lph fuel pump, 30lb injectors,76mm mass air meter calibrated to the 30lb (i think?), long tube headers off-road h-pipe with glasspacks

02-04-2008, 10:18 PM	#4
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Deceleration vibration The stock balancers are crap IMO, they have a rubber seal that comes out over time and will be visible if it is, this will throw everything off balance, put a nice balancer and an aluminum DS on and your vibs will go away. The stock DS's aren't balanced to well either. Good luck. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sluggish deceleration w/ manual trans	thomash85715	Small Ponies	3	05-04-2004 04:01 PM
Whining t-5 on deceleration??	90dpscoupe	Windsor Power	1	08-26-2001 03:41 PM
Light thump heard under accel/deceleration	gray87GT	Windsor Power	6	05-25-2001 06:27 AM
Backfiring on deceleration fixed !!!!	70 Pony	Classic Mustangs	2	09-01-2000 08:37 AM
Backfiring on Deceleration...	Idhomustang	Classic Mustangs	12	08-31-2000 01:59 AM