Parts advice, please??

blckhrs7 · 05-25-2006, 09:28 PM

My 94 has been reliable for 5 yrs/60k with only oil changes. However, it's time for some much needed maintenance. Problem is I've been out of the auto mix for so long, there have been alot of product changes. I need some info on what everyone is using. This car is now a daily driver only (and sluggish). It's reliable, but not a racer in its old age (149K on odometer), so I don't need the best that $ can buy. I started by installing Bosch platinum plugs today. MSD Super Cond wires, Ford Racing cap and rotor ordered today. Need advice on the following (brands and types): clutch, flywheel (vibrates badly on take off), tranny fluid.

And any advice on where to go from here to wake it back up.

Thanks alot

Fat0eknee · 05-25-2006, 10:39 PM

well thats a good start on waking it back up, you hit the the right things with the cap and rotor, plugs and wires - as for the clutch ...it depends on what you want. i think ford makes a clutch actually if im not mistaken that will hold a little better than the stock one and its still a fair price. when i browse for parts i just go to summitracing.com and there you can browse for parts that are specific to your car

good luck bud, tony

rwhite65 · 05-26-2006, 12:05 AM

fuel filter
Ryan

blckhrs7 · 05-26-2006, 01:06 PM

I already have things like fuel filter on my list. I really need input on things that you don't normally replace every 30 - 60K. What about injectors, sensors, bearings, ect...?

Fat0eknee · 05-26-2006, 03:27 PM

if your sensors still work and your bearings dont hum ...i wouldnt worry about them

Fat0eknee · 05-26-2006, 03:28 PM

actually you could put a can of k&w block seal in it ...supposed to be pretty good stuff

stanger66 · 05-26-2006, 07:09 PM

BG 3 step fuel injection flush kit, coolant flush, p.s flush, brake flush, rear end flush, flush trans. clutch kit-centerforce works great. air filter-k&n, flush engine too, maybe coil too.

05-25-2006, 09:28 PM	#1
blckhrs7 Registered Member Join Date: Mar 2000 Location: Southern IL Posts: 123	Parts advice, please?? My 94 has been reliable for 5 yrs/60k with only oil changes. However, it's time for some much needed maintenance. Problem is I've been out of the auto mix for so long, there have been alot of product changes. I need some info on what everyone is using. This car is now a daily driver only (and sluggish). It's reliable, but not a racer in its old age (149K on odometer), so I don't need the best that $ can buy. I started by installing Bosch platinum plugs today. MSD Super Cond wires, Ford Racing cap and rotor ordered today. Need advice on the following (brands and types): clutch, flywheel (vibrates badly on take off), tranny fluid. And any advice on where to go from here to wake it back up. Thanks alot __________________ 94 GT 1 5/8" equal shorties, Flowmasters, X Pipe, pulleys,BBK cold air induction, MSD ignition, Pro 5.0 shifter, MAC upper&lower rear control arms, MAC 1 1/2" prog. rate springs

05-25-2006, 10:39 PM	#2
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: Parts advice, please?? well thats a good start on waking it back up, you hit the the right things with the cap and rotor, plugs and wires - as for the clutch ...it depends on what you want. i think ford makes a clutch actually if im not mistaken that will hold a little better than the stock one and its still a fair price. when i browse for parts i just go to summitracing.com and there you can browse for parts that are specific to your car good luck bud, tony __________________ When you do things right, people won't be sure you've done anything at all...

05-26-2006, 12:05 AM	#3
rwhite65 Ride Hard Join Date: Oct 2000 Location: Wyoming IL Posts: 1,094	Re: Parts advice, please?? fuel filter Ryan __________________ 65 Fastback 91 roller 306, H/C/I AOD-Bauman, PI Stallion, 4.10's and traction loc 04 Grand Cherokee Freedom Edition 79 Ford F-250 4x4 - Restored

05-26-2006, 01:06 PM	#4
blckhrs7 Registered Member Join Date: Mar 2000 Location: Southern IL Posts: 123	Re: Parts advice, please?? I already have things like fuel filter on my list. I really need input on things that you don't normally replace every 30 - 60K. What about injectors, sensors, bearings, ect...? __________________ 94 GT 1 5/8" equal shorties, Flowmasters, X Pipe, pulleys,BBK cold air induction, MSD ignition, Pro 5.0 shifter, MAC upper&lower rear control arms, MAC 1 1/2" prog. rate springs

05-26-2006, 03:27 PM	#5
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: Parts advice, please?? if your sensors still work and your bearings dont hum ...i wouldnt worry about them __________________ When you do things right, people won't be sure you've done anything at all...

05-26-2006, 03:28 PM	#6
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: Parts advice, please?? actually you could put a can of k&w block seal in it ...supposed to be pretty good stuff __________________ When you do things right, people won't be sure you've done anything at all...

05-26-2006, 07:09 PM	#7
stanger66 dreaming about mustangs Join Date: Mar 2006 Location: laurel, md Posts: 178	Re: Parts advice, please?? BG 3 step fuel injection flush kit, coolant flush, p.s flush, brake flush, rear end flush, flush trans. clutch kit-centerforce works great. air filter-k&n, flush engine too, maybe coil too. __________________ Ross 06 Saleen S281SC Convertible 6spd 04 Freestar(wife) 66 mustang w/orig. Carroll Shelby racing 7 spoke 14X7's aluminum 02 pontiac sunfire 2.2 ecotec(great gas mileage) still GM junk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is your favorite general auto parts store?	Fox Body	Blue Oval Lounge	28	12-07-2017 11:18 AM
question & advice...please	Robocop	Windsor Power	7	05-24-2003 03:47 AM
Trading Notch for parts	Coupe Devil	Blue Oval Lounge	3	04-20-2002 12:58 PM
My Good Experience With Ford Parts On Line - Good Discounts	Maroon 5.0 LX	Blue Oval Lounge	1	10-03-2001 09:46 AM
What would these parts be worth?	2FastLX	Blue Oval Lounge	3	03-13-2001 09:11 AM