gauges

12-31-2002, 03:28 PM

i just put on white face gauges and i put the needles back on the same way i took them off and right now they are everywhere.

is there a way to get them all back down or do i have to fix them by hand.

if by hand where should i put them at

thanks

Bad89stang · 01-02-2003, 12:50 AM

You will have to do it by hand. Did you note the position when you started? You are probably going to have to keep messing with it until you get it right. Just plug in the gauges and leave the cover off. That way you can turn on the key and keep adjusting the needles. Fun Fun.

84LX89GT · 01-03-2003, 01:18 AM

yeah it sounds like you've gone some adjusting to do. Bad89stang is right, you're just gonna have to keep on messing with them till they're right (or somewhat close).

12-31-2002, 03:28 PM	#1
1989stanger Guest Posts: n/a	gauges i just put on white face gauges and i put the needles back on the same way i took them off and right now they are everywhere. is there a way to get them all back down or do i have to fix them by hand. if by hand where should i put them at thanks

01-02-2003, 12:50 AM	#2
Bad89stang Registered Member Join Date: Aug 2001 Location: Ft. Worth, TX Posts: 456	guages You will have to do it by hand. Did you note the position when you started? You are probably going to have to keep messing with it until you get it right. Just plug in the gauges and leave the cover off. That way you can turn on the key and keep adjusting the needles. Fun Fun. __________________ You're gonna need your seatbelt

01-03-2003, 01:18 AM	#3
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	yeah it sounds like you've gone some adjusting to do. Bad89stang is right, you're just gonna have to keep on messing with them till they're right (or somewhat close). __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reverse lit gauges - oil, EGT, fuel	speedemn	Audio, Security, & Electronics	2	05-24-2003 02:06 PM
Gauges??	SleeperGT	Modular Madness	2	03-03-2003 08:33 PM
Aftermarket gauges in 85 dash, wire breakdown inside	RUSTANG	Windsor Power	2	02-12-2001 11:06 AM
trans temp, oil pressure gauges, install questions....	88COBRA	Windsor Power	6	02-01-2001 12:38 PM
Gauges????	DemonGT	Windsor Power	8	01-16-2001 10:41 PM