![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: May 1999
Location: garrett,kentucky
Posts: 77
|
![]() i was wondering what the difference is between 9 to 1 compression or a higher compression pistons.does high compression engines run stronger than a 9 to 1 or a low compression engine.the reason i ask is because i'm thinking about building me either a 331 stroker or a 306 engine and it's either going to have nitrous or a supercharger on it and i'm just wondering what would be my best bet.thanks for you help.
|
![]() |
![]() |
![]() |
#2 |
Moderator
Join Date: Sep 1998
Location: Grand Rapids, Michigan, USA
Posts: 1,001
|
![]() The higher the compression ratio, the more power you'll get. You HAVE TO be careful with compression (and timing and fuel mixture) when you're doing power adders, otherwise it'll go up in smoke. Personally, I would stay around 9.2:1 or lower for power adders, and a good FMU. I don't have that much experience with them, but I'm sure our other members will tell you a little more than I can.
![]() ------------------ Capri306, Moderator, The Mustang Works Online 1979 Mercury Capri, 5.0L -- C4 -- 2.73 1987 Mustang LX Notch ![]() |
![]() |
![]() |
![]() |
#3 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
![]() It would be better if you could choose the nitrous, or the blower. Then you could build the motor for the setup you want.
------------------ blown347,free breathing heads and exhaust, solid roller cam, tremec,moser axles, 4.10's, role cage and all the other stuff. 11.8 @ 115 very untuned 1993lx5.0 AOD dailydriver |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Jan 2001
Location: baltimore
Posts: 12
|
![]() IF U GO WITH THE SUPERCHARGE YOU WILL WANT TO GO WITH LOWER COMPRESSION PISTONS, B/C THE SUPERCHARGER BUMPS UP THE COMPRESSION DEPENDING ON HOW MUCH BOOST U RUN.
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]() The latest trend I've noticed is more compression and less power adder. Some have done this with good results. I really don't plan on adding much more boost to my ride(daily driver) but I could because I have 9:1 compression.
After I read about a guy that ran a higher compression and about the same boost as I run with great results I started wishing I had done that. It really hasn't caught on yet, but it will. You might want to call a good engine builder and discuss it with them. Actually this reminds me of JMS. I remember reading about this guy that was on a budget and added only the essentials and a Kenne Bell blower. Then he started screwing with the computer. He was able to get around 100hp more out of that white coupe, messing with the computer... Now look at him.. Most will tell you low compression for a power adder combo but times are changing. Hey you could always build a low compression engine and then push up the boost. If you build a higher compression engine you may not need any boost at all. Example.. My cobra has 9.85:1 compression(I think). What compression does the infamous LS1 have? I don't remeber exactly but I can tell you its over 10.5:1... Someone please correct me.(Hmm.. time for another beer) Sorry for rambling.. |
![]() |
![]() |
#6 |
Registered Member
Join Date: Jan 2001
Location: Villa Park, IL
Posts: 36
|
![]() If your going with a forced induction (blower) your going to want to go with lower compression. The higher compression you go in a regular motor the higher octane gas you will have to run 10:1 is alright for premium unleaded. With the higher compression your also want to get your timing tunned well. Otherwise you start causing detonation and blowing holes through your pistons. Which is not fun. Try to stay away for the detonation mixture of high compression and low octane.
|
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: May 1999
Location: Georgia
Posts: 3,866
|
![]() you can run nitrous with a high compression setup, but not a blower.
------------------ 1993 GT/AOD '93 Mustang GT |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Low, loppy idle then too high, then low again.... | Fox Body | Windsor Power | 6 | 08-05-2003 11:29 PM |
Speed Secret # 3 | jim_howard_pdx | Windsor Power | 13 | 11-09-2002 10:35 AM |
Stock compression for an 87 5.0 HO??? | Wally | Windsor Power | 3 | 10-04-2002 12:51 PM |
Stupid Question? | SilverGT02 | Modular Madness | 4 | 07-06-2002 11:01 AM |
Why do I see some high performance engines w/ breather caps on the oil spout?????? | Stang_ROTY | Windsor Power | 24 | 08-18-2001 12:28 AM |