Need an AOD that can handle 500 ponies

306bullet · 07-01-2005, 11:24 PM

I have a friend that is going to be putting an AOD in his 93 hatch. The motor is a 11:1 306 with AFR 185's, TF R intake, Anderson cam, long tubes, 4:10's and so on. He is planning on putting a 150 Nitrous Express kit on it as well and was wondering who around the general IL or IN area builds a good AOD trans that will last? Any help is greatly appreciated. Also if you have one what did you pay for it as well? Thanks,

Brent

Dave_mustang_50 · 07-02-2005, 07:01 AM

Try www.lentechautomatics.com. They have one they call the street terminator that is rated for 700.

07-01-2005, 11:24 PM	#1
306bullet Registered Member Join Date: Jul 2002 Location: Indiana Posts: 51	Need an AOD that can handle 500 ponies I have a friend that is going to be putting an AOD in his 93 hatch. The motor is a 11:1 306 with AFR 185's, TF R intake, Anderson cam, long tubes, 4:10's and so on. He is planning on putting a 150 Nitrous Express kit on it as well and was wondering who around the general IL or IN area builds a good AOD trans that will last? Any help is greatly appreciated. Also if you have one what did you pay for it as well? Thanks, Brent

07-02-2005, 07:01 AM	#2
Dave_mustang_50 Registered Member Join Date: Aug 1999 Location: New Port Richey, Florida Posts: 483	Re: Need an AOD that can handle 500 ponies Try www.lentechautomatics.com. They have one they call the street terminator that is rated for 700. __________________ 1969 Mach 1 351C with a c6(for now) Sold 92 Rag Top GT Procharged & intercooled DSS 331 LC Holley Systemax 2 Intake, Edelbrock RPM Heads,E 303 ,blow thru air meter, race bypass, 42 pph injectors,65mm tb,1.7 rr, Mac long tube headers w/off road H pipe, Force 2 catback, TKO,Pro 5.0, K&N, Alum DS,3 core radiator, subframe connectors,3.73`s, Nitto DR`s and a Heavy Foot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Handle Removal/Install	zgreatwhite	Classic Mustangs	1	01-21-2005 08:14 AM
Door Handle Replacement	Dan_Cicero	Small Ponies	1	05-28-2003 03:57 PM
Hurst T-bar handle question	Torinalth	Modular Madness	4	03-26-2003 06:55 PM
Door handle help	HellRaiser92	Blue Oval Lounge	1	04-20-2002 04:03 PM
Any info on my 4-bolt Cleveland block...possibly how much power can it handle?	Shawn	Classic Mustangs	1	09-26-2000 06:22 PM