MSD or CRANE

Scrapla · 05-22-2004, 09:38 PM

Hi, I need an ignition system for my 347 going in, the motor is mild and a daily driver with a NOS system (kit #5115) I already have a Crane Fireball coil and was planning on getting the Crane Hi-6 but wanted to know what you guys think between the Crane Hi-6 and the MSD box, just want some feedback on both?

RPM427 · 05-22-2004, 10:33 PM

I have used the MSD digital 6 on my 91 Mustang. It has a built in boost retard for nitrous, a 2 step rev-limiter, a high end rev limiter, and some other nice features. It was also seemed to be easier on the plugs then the MSD analog boxes.

stang_racer20 · 05-23-2004, 01:08 AM

MSD an Crane are both very reputable names. However, it has been discussed that Crane and Jacobs are both a little outdated as compared to MSD. All three have there goods and bads though.

LX5liter · 05-23-2004, 11:02 AM

I'm using the Mallory VI and it works great. It has all the features of the MSD digital 6 ( 2step, boost retard, start retard, Hi/Low switches for nitrous, etc... ) for about half the price.

Rev · 05-23-2004, 06:53 PM

I have used the Mallory 6AL and after it left me sitting on the side of the road for the 2nd time in about 2 years, I didn't even bother to send it back for repair. I just bought a MSD 6AL and so learned from experience. The MSD has worked perfectly for about a year now.

Rev

Scrapla · 05-23-2004, 07:25 PM

Thanks guys after further research Im gonna be goin with the MSD it has all the features im looking for and the right price.

Rev · 05-23-2004, 07:31 PM

MSD is the front runner right now I think. Crane is top notch in quality as well, though I've never owned one. You would have done well with either choice IMHO.

Rev

05-22-2004, 09:38 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	MSD or CRANE Hi, I need an ignition system for my 347 going in, the motor is mild and a daily driver with a NOS system (kit #5115) I already have a Crane Fireball coil and was planning on getting the Crane Hi-6 but wanted to know what you guys think between the Crane Hi-6 and the MSD box, just want some feedback on both? __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

05-22-2004, 10:33 PM	#2
RPM427 Registered Member Join Date: Aug 2001 Location: Huntington NY Posts: 573	I have used the MSD digital 6 on my 91 Mustang. It has a built in boost retard for nitrous, a 2 step rev-limiter, a high end rev limiter, and some other nice features. It was also seemed to be easier on the plugs then the MSD analog boxes. __________________ -1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway -1994 Ranger w/ 427cid windsor (daily beater) check it out!

05-23-2004, 01:08 AM	#3
stang_racer20 Registered Member Join Date: Jun 2003 Location: Wisconsin Posts: 348	MSD an Crane are both very reputable names. However, it has been discussed that Crane and Jacobs are both a little outdated as compared to MSD. All three have there goods and bads though. __________________ 92 Mustang GT, 347 Stroker(Forged Steel Crank/Rods-Balanced, Forged Aluminum Dished Pistons), Trick Flow Track Heat Intake, Trick Flow Twisted Wedge Heads w/ Stage 3 port/polish, 80mm C&L MAF, FMS 30# Inj., BBK AFPR, Trick Flow Stage 2 Cam, Trick Flow 1.6R Rockers, BBK E.L. Headers, Flowmaster Cat-Back, MAC CAI, FMS Pulleys, Griffin Alum. Radiator, MSD Pro-Billet Distributor; AOD, Dynamic 3300 Lockup Converter, B & M Super Cooler, B&M Ratchet Shifter; 3:73 gears.

05-23-2004, 11:02 AM	#4
LX5liter dude5l Join Date: May 2001 Location: Grande Prairie, Alberta, Canada Posts: 603	I'm using the Mallory VI and it works great. It has all the features of the MSD digital 6 ( 2step, boost retard, start retard, Hi/Low switches for nitrous, etc... ) for about half the price. __________________ Good luck! Brad R. 1992 L.X. 5.0 coupe MODS: A few little bolt ons New Best time ...11.60 @ 128 mph @ 2000+ ft altitude. Rice Haters Club member #39 Users rides #2542

05-23-2004, 07:25 PM	#6
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Thanks guys after further research Im gonna be goin with the MSD it has all the features im looking for and the right price. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

05-23-2004, 06:53 PM	#5
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Mallory 6AL I have used the Mallory 6AL and after it left me sitting on the side of the road for the 2nd time in about 2 years, I didn't even bother to send it back for repair. I just bought a MSD 6AL and so learned from experience. The MSD has worked perfectly for about a year now. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

05-23-2004, 07:31 PM	#7
Rev Registered Member Join Date: Nov 1998 Location: Houston, Tx. Posts: 3,887	Good choice MSD is the front runner right now I think. Crane is top notch in quality as well, though I've never owned one. You would have done well with either choice IMHO. Rev __________________ '66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi. O.B.C. #2 '66 coupe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
crane ps91 mounting	scale	Windsor Power	2	09-15-2002 11:22 PM
crane 2030 cam	1985Mustang	Windsor Power	2	12-18-2001 08:58 PM
crane cam dyno results are in ,kind of?	46stang	Modular Madness	5	12-04-2001 08:58 PM
Crane Cams...	MustangDanny	Windsor Power	5	12-01-2001 09:34 PM
Crane 2031 cam and Edelbrock intakes on, impressions.....	93CobraR	Windsor Power	4	05-23-2001 11:53 AM