What Valve Cover for TFS heads??

Stang Runner · 08-10-2001, 12:06 PM

Well I have some $$$ now what ones should I get It will have Fuel Injection. I dont think the stock ones will fit help fast $500 wants to be spend FAST

70mm TB and on Valve Covers.

------------------
14.62@96.9 Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C
Drive Train: 3.55, World Class T-5, Lakewood Bell housing, Adjustable Clutch Cable, AL Driveshaft
Suspension: MAC Control Arms, Maximum Motorsports Front Grip Package, H&R Sport Springs, Bilstein Shocks
Exhaust: 1 5/8 UN-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back
Cooling: 3 Core Radiator

byrnech · 08-10-2001, 12:14 PM

Why not go with the Trick Flow valve covers? They are nice pieces with the Trick Flow logo, and they come in tall or standard. They sell for about $99.00 a pair.

Stang Runner · 08-10-2001, 12:22 PM

They say Not for Fuel Injection... I would like to get them but will they fit in my car??

fastang · 08-10-2001, 01:49 PM

RTV two of the thick cork style gaskets together and use your stock covers. ANY other covers will put the oil fill tube under the throttle body which just plain sucks. Save the cash and get a bottle.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

exgmguy · 08-10-2001, 02:39 PM

the oil fill tube under the throttle body problem will happen on an SN-95 5.0 due to the curved tb adapter. I use the aluminum motorsport valve covers.

Those TFS covers do look sweet. Too bad they are not for injected cars. BTW, Make sure you specify "injected" when you buy valve covers.

------------------
1988 Mustang GT
11.8 @ 123 (7/14/01)
1992 BadAzz Wrangler
1993 Explorer

Stang Runner · 08-10-2001, 03:19 PM

I just ordered Aluminum Mustang powered by Ford valve covers. for $160 And I order a 70TB and a cold intake with a cool steel pipe from Mac. I am out of $$$ for this week Thanks everyone

jimberg · 08-10-2001, 03:21 PM

I have the Trick Flow valve covers (short ones) and they clear my FMS 1.6 roller rockers.

------------------
351W 89 Mustang GT Convertible

[This message has been edited by jimberg (edited 08-10-2001).]

08-10-2001, 12:06 PM	#1
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	What Valve Cover for TFS heads?? Well I have some $$$ now what ones should I get It will have Fuel Injection. I dont think the stock ones will fit help fast $500 wants to be spend FAST 70mm TB and on Valve Covers. ------------------ 14.62@96.9 Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C Drive Train: 3.55, World Class T-5, Lakewood Bell housing, Adjustable Clutch Cable, AL Driveshaft Suspension: MAC Control Arms, Maximum Motorsports Front Grip Package, H&R Sport Springs, Bilstein Shocks Exhaust: 1 5/8 UN-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling: 3 Core Radiator

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
valve cover venting	surfbeast	Modular Madness	2	02-18-2004 08:51 PM
Bent valve, heads are off, what mods next?	NYC1	Windsor Power	1	07-18-2003 09:34 AM
valve cover gaskets? which ones?	Coupe50h	Windsor Power	5	03-05-2003 09:52 AM
Valve cover clearance	UglyFast88	Windsor Power	0	09-09-2002 09:50 AM
Valve Cover	86GT	Windsor Power	2	08-14-2001 09:55 PM

08-10-2001, 12:14 PM	#2
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	Why not go with the Trick Flow valve covers? They are nice pieces with the Trick Flow logo, and they come in tall or standard. They sell for about $99.00 a pair.

08-10-2001, 12:22 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	They say Not for Fuel Injection... I would like to get them but will they fit in my car??

08-10-2001, 01:49 PM	#4
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	RTV two of the thick cork style gaskets together and use your stock covers. ANY other covers will put the oil fill tube under the throttle body which just plain sucks. Save the cash and get a bottle. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

08-10-2001, 02:39 PM	#5
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	the oil fill tube under the throttle body problem will happen on an SN-95 5.0 due to the curved tb adapter. I use the aluminum motorsport valve covers. Those TFS covers do look sweet. Too bad they are not for injected cars. BTW, Make sure you specify "injected" when you buy valve covers. ------------------ 1988 Mustang GT 11.8 @ 123 (7/14/01) 1992 BadAzz Wrangler 1993 Explorer

08-10-2001, 03:19 PM	#6
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I just ordered Aluminum Mustang powered by Ford valve covers. for $160 And I order a 70TB and a cold intake with a cool steel pipe from Mac. I am out of $$$ for this week Thanks everyone

08-10-2001, 03:21 PM	#7
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	I have the Trick Flow valve covers (short ones) and they clear my FMS 1.6 roller rockers. ------------------ 351W 89 Mustang GT Convertible [This message has been edited by jimberg (edited 08-10-2001).]