FRPP 70MM Mass Air Kit (aka Cobra kit)

RMARIANI · 08-09-2001, 12:38 PM

Anyone have an opinion (good or bad) on the Ford Racing induction kit. It comes with the 70MM air meter, 24lb. injectors and "specially calibrated EEC-IV module. I have an '89 GT and will soon be ordering a Ford GT-40 long block and Cobra intake.

TEXSN95 · 08-09-2001, 03:13 PM

Just get a Pro M 75 and 24s. The Cobra EEC sucks anyways.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 105.7 w/ 2.22 <-- 284 rwhp / 323 rwtq

exgmguy · 08-09-2001, 03:25 PM

yup, The Cobra meter is very restrictive compared to a similar aftermarket meter, and the computer is tuned very soft for warranty issues I assume. Why do you think a 302 with GT-40 heads, Cobra intake, 65 mm tb, "special cam" runs kinda crappy in the Cobras.

08-09-2001, 12:38 PM	#1
RMARIANI Registered Member Join Date: Apr 2000 Location: New Jersey Posts: 167	FRPP 70MM Mass Air Kit (aka Cobra kit) Anyone have an opinion (good or bad) on the Ford Racing induction kit. It comes with the 70MM air meter, 24lb. injectors and "specially calibrated EEC-IV module. I have an '89 GT and will soon be ordering a Ford GT-40 long block and Cobra intake.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Buddy Just Bought a 98 Cobra.....	INVINCISTANG	Stang Stories	10	06-25-2002 01:36 PM
Ran a modded WRX in the cobra	StoplightWarrior	Stang Stories	3	05-27-2002 12:27 PM
was there ever such thing as an early hartop mustang with a cobra engine?	domingo	Classic Mustangs	5	04-06-2002 07:56 PM
What's the difference between 95 GT and 95 Cobra?	Ron Brooks	Blue Oval Lounge	5	07-13-2001 12:56 PM
2001 Cobra Over Rated AGAIN!!!?!?!!! Wassup Ford?	KillaZ350	Blue Oval Lounge	24	06-29-2001 05:24 PM

08-09-2001, 03:13 PM	#2
TEXSN95 Registered Member Join Date: Mar 2001 Location: college station, tx Posts: 143	Just get a Pro M 75 and 24s. The Cobra EEC sucks anyways. ------------------ Clint L. White 95 Cobra #3637 58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW LCAs, Kenny Brown super subs, Steeda CC plates, aluminum driveshaft, Steeda quadrant, B&M ripper, Kirban FPR, MSD6A, Taylor wires, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s 13.61 @ 105.7 w/ 2.22 <-- 284 rwhp / 323 rwtq

08-09-2001, 03:25 PM	#3
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	yup, The Cobra meter is very restrictive compared to a similar aftermarket meter, and the computer is tuned very soft for warranty issues I assume. Why do you think a 302 with GT-40 heads, Cobra intake, 65 mm tb, "special cam" runs kinda crappy in the Cobras.