Replacment Injector

Scrapla · 12-07-2003, 07:01 PM

Any of you guys/girls buy a replacment injector from a pep boys or advance auto , any place like that cause I went and looked at what they had for me a 19# stock replacment and they dont have a pintal just a hole at the bottom will this work I just need it to get me by until my new motor is intsalled.

Scrapla · 12-07-2003, 09:47 PM

I might goto the local u-pull it scrap yard so what other ford cars can I pull some injectors off of I think the older t-birds and cougars would work so if anyone can tell me I would apreciate it I just need one or two 19#ers to get me by until my motor is installed, please any suggestion would help.

USMC302 · 12-08-2003, 07:22 AM

Not sure if that will be suffice, but would assume if advanced Auto or Pep Boys is recommending it, then it should be fine. You could pick up a really cheap set on ebay. Look in the classified section of this site, never know...

Scrapla · 12-08-2003, 06:41 PM

Has anyone actually used a replacment injector from a parts store cause its only $32 bucks or does anyone know the vehicles have the same 19# injectors on my car that I can take off and use.

SilverSN95 · 12-10-2003, 02:48 AM

I'm not sure about the injector at Pep Boys but I recently replaced a leaking stock injector with a newer version of the Bosch 19 lb injector and have had no issues. I even passed my emissions test with no problem. This newer 19 lb injector didn't have the pintle either. It has a four hole orifice instead. It probably has a little different spray pattern than the stock 19 injector but that doesn't seem to bother the engine at all. As long as it has the same flow rate it should be OK. I have had this new injector in since the beginning of the summer with no problems.
My buddy's 02GT looks to have the same one. The 4.6L motors seem to still be using the old bosch style injectors.

Scrapla · 12-10-2003, 01:45 PM

Hey thanks, and yes they are cause I pulled one from at the junk yard from a new town car with the 4.6 v8 and it had the same non pintal sytle, I got some injectors from a 5.0 HO mark 7 and they all have the pintal and I tested there flow and they work fine so im gonna install them for now, cost me 5bucks a peice

12-07-2003, 07:01 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Replacment Injector Any of you guys/girls buy a replacment injector from a pep boys or advance auto , any place like that cause I went and looked at what they had for me a 19# stock replacment and they dont have a pintal just a hole at the bottom will this work I just need it to get me by until my new motor is intsalled. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

12-07-2003, 09:47 PM	#2
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	I might goto the local u-pull it scrap yard so what other ford cars can I pull some injectors off of I think the older t-birds and cougars would work so if anyone can tell me I would apreciate it I just need one or two 19#ers to get me by until my motor is installed, please any suggestion would help. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

12-08-2003, 07:22 AM	#3
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Not sure if that will be suffice, but would assume if advanced Auto or Pep Boys is recommending it, then it should be fine. You could pick up a really cheap set on ebay. Look in the classified section of this site, never know... __________________

12-08-2003, 06:41 PM	#4
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Has anyone actually used a replacment injector from a parts store cause its only $32 bucks or does anyone know the vehicles have the same 19# injectors on my car that I can take off and use. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

12-10-2003, 02:48 AM	#5
SilverSN95 Registered Member Join Date: May 2002 Location: Ontario Posts: 39	I'm not sure about the injector at Pep Boys but I recently replaced a leaking stock injector with a newer version of the Bosch 19 lb injector and have had no issues. I even passed my emissions test with no problem. This newer 19 lb injector didn't have the pintle either. It has a four hole orifice instead. It probably has a little different spray pattern than the stock 19 injector but that doesn't seem to bother the engine at all. As long as it has the same flow rate it should be OK. I have had this new injector in since the beginning of the summer with no problems. My buddy's 02GT looks to have the same one. The 4.6L motors seem to still be using the old bosch style injectors. __________________ Al, 94 Mustang GT 3.55 gears Magnapack mufflers with 2.5" tails STEEDA TRI-AX Shifter MAC pulleys

12-10-2003, 01:45 PM	#6
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Hey thanks, and yes they are cause I pulled one from at the junk yard from a new town car with the 4.6 v8 and it had the same non pintal sytle, I got some injectors from a 5.0 HO mark 7 and they all have the pintal and I tested there flow and they work fine so im gonna install them for now, cost me 5bucks a peice __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Injector problems	weagle	Windsor Power	1	01-21-2002 06:14 PM
Experienced Fuel Injector harness question	Stang_ROTY	Windsor Power	5	07-19-2001 11:46 PM
Injector Leak HELP!!!!!	Z28EATR	Windsor Power	1	04-28-2001 11:33 AM
Troubleshooting a missing injector?	MuscleStang351	Windsor Power	7	04-12-2001 01:36 AM
SC T-Bird or SVO Mustang Injector size	MiracleMax	Windsor Power	4	03-13-2001 01:51 AM