Ground pounder Kmember install question

ciara · 01-05-2004, 01:53 AM

I bought a Ground pounder K member and am having a problem. When I went to reinstall my flaming river rack the stock bolts that I had used before are too big for the hole, and the bushings in the rack are too small to fit onto the K member. Has anybody else had this problem? Do they sell different bolts and bushings for the K member or do I have to modify this myself?

QuantumMotorsports · 01-05-2004, 08:12 PM

I had a problem with my QA1 k member. The rack on my car had metal bushings inside of the rubber ones that were too small. I had to get a set of bushings off of my old cougar. It's bushings were the right size for some reason. I wish I could help more, good luck.

andy669 · 01-05-2004, 10:36 PM

Get the Energy Suspension polyurethane bushings and just get some bolts from the hardware store.

Andy

01-05-2004, 01:53 AM	#1
ciara Registered Member Join Date: Jan 2002 Posts: 100	Ground pounder Kmember install question I bought a Ground pounder K member and am having a problem. When I went to reinstall my flaming river rack the stock bolts that I had used before are too big for the hole, and the bushings in the rack are too small to fit onto the K member. Has anybody else had this problem? Do they sell different bolts and bushings for the K member or do I have to modify this myself?

01-05-2004, 08:12 PM	#2
QuantumMotorsports Registered Member Join Date: Jul 2000 Location: Norman, Oklahoma, USA Posts: 597	I had a problem with my QA1 k member. The rack on my car had metal bushings inside of the rubber ones that were too small. I had to get a set of bushings off of my old cougar. It's bushings were the right size for some reason. I wish I could help more, good luck. __________________ Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites

01-05-2004, 10:36 PM	#3
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	Get the Energy Suspension polyurethane bushings and just get some bolts from the hardware store. Andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSD 6BTM Install Question	p51302	Power Adders	1	05-31-2004 08:21 AM
BBK Equal Length Shorties - Install Question	Mac_5.0	Windsor Power	3	06-12-2002 07:50 AM
A Question for 94-95 owners concerning 1.7RR INSTALL	SlowStang2	Windsor Power	6	09-22-2001 06:39 PM
Mark VIII fan install question	FordGT145	Windsor Power	0	07-27-2001 08:15 PM
Intake install question???????	boricua_5litro	Windsor Power	1	04-25-2001 12:28 PM