MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-23-2008, 06:05 PM   #1
Lashbrook27
Registered Member
 
Join Date: Aug 2008
Posts: 11
Default Engine shutdown

I have a 1990 Mustang GT. The engine is shutting off and the fuel pump relay starts to open and close very quickly. I jumped the power in the EEC Power relay to rule out a bad ignition switch, and EEC relay. After jumping it I let it run for several miniuts when the same thing happened. The fuel pump relay started opening and closing really fast then the engine died. Has this happend to anybody before? Is the computer cycling the system like an initial prime, or is the computer starting to take a dump? There are a lot of things that are powered off the EEC relay, could any of those things cause this?

...1990 Mustang GT/stock block & cam/GT40P Heads/ford racing headers/bbk high flow h-pipe w/cats/40 series flowmasters dumped/cobra intake/73 c&l MAF/3.73's/24lb injectors/bbk cold air fender mount intake/msd cap & rotor/msd 8mm wires/(soon to have MSD 6AL, not hooked up)/Automatic w/shift kit & cooler............
Lashbrook27 is offline   Reply With Quote
Old 09-10-2008, 06:19 PM   #2
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: Engine shutdown

well with out being there its hard to say but, i would check the wire from the computer goin to the relay and see if you are losing power from the computer when the relay is clicking.if you have 12 volts there then make sure the connections are good.then i would replace the relay.now i know some are under the seat and some in the engine bay.
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
EEC Power Relay/Shutdown problem Lashbrook27 Audio, Security, & Electronics 2 07-07-2010 02:06 PM
Texas Street racing shutdown???!? FivepointOH Stang Stories 9 09-29-2003 02:23 PM
Bolts for engine to engine stand?? DemonGT Windsor Power 8 04-15-2003 10:16 AM
Engine shutdown!!!! SPEEDY88 Windsor Power 5 12-18-2001 02:27 PM
Need to pull the engine, how to remove the engine mounts? mustang928 Windsor Power 5 07-17-2001 04:45 PM


All times are GMT -5. The time now is 09:22 PM.


SEARCH