Intake question??

boricua_5litro · 01-22-2001, 12:09 PM

Hey, with the following mods what would be the best intake for a 94 gt out of gt-40, edelbrock or holley? Underdrives, comlepete mac exhaust, Mac cold air induction, jet chip and 3:73 gears. Second question is, do i need to buy a different hood??? Thanks..

gofastlx · 01-22-2001, 02:12 PM

Well...first off check the chip at the door..you don't need it..oops I forgot on the AODE's you need that for different gears. I'd go with either the GT-40, or the Ebok personally they rate the same, but the E-bok has a bit more high Rpm potential...You will most likely not need a new hood, I had the E-bok performer, and it fit under my stock 92 hood with no problems.

Rob

SLOWPONY · 01-22-2001, 05:12 PM

Go with the Edelbrock intake. It is better than the GT-40. I have only heard good about the Holley but never have known anyone to run it. No, you won't have to buy a new hood.

Noongs94GT · 01-22-2001, 07:23 PM

I think that the Cobra intake for what you have listed as mods would be my prefered intake. It just has the bottom end and the topside that a nat asp requires. If that isnot something you'd be into check out the Holley my buddies 91 notch is using the System max 2 setup and is quite happy with the performance. Good luck and let us know what you decided on.

------------------
94GT 5spd, Kenne Bell blowing
11psi, Speedbrain, GT-40
Heads w/ 1.77RR, 2031 cam,
30lb injectors, KB Boostapump,
Vortech T-Rex, Super FMU,

01-22-2001, 12:09 PM	#1
boricua_5litro Registered Member Join Date: Jan 2001 Location: daleville al Posts: 26	Intake question?? Hey, with the following mods what would be the best intake for a 94 gt out of gt-40, edelbrock or holley? Underdrives, comlepete mac exhaust, Mac cold air induction, jet chip and 3:73 gears. Second question is, do i need to buy a different hood??? Thanks..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Air Intake Box Question	ponyboy25	Windsor Power	4	02-14-2003 07:43 PM
Intake Question?	jason 95gts	Windsor Power	7	08-03-2002 11:24 PM
Performer RPM carbed intake question?	shovelnose	Windsor Power	2	09-24-2001 11:42 PM
Intake install question???????	boricua_5litro	Windsor Power	1	04-25-2001 12:28 PM
cobra intake question??	DemonGT	Windsor Power	1	02-21-2001 08:15 PM

01-22-2001, 02:12 PM	#2
gofastlx Registered Member Join Date: Jan 2001 Location: Rochester Hills, MI Posts: 40	Well...first off check the chip at the door..you don't need it..oops I forgot on the AODE's you need that for different gears. I'd go with either the GT-40, or the Ebok personally they rate the same, but the E-bok has a bit more high Rpm potential...You will most likely not need a new hood, I had the E-bok performer, and it fit under my stock 92 hood with no problems. Rob

01-22-2001, 05:12 PM	#3
SLOWPONY Registered Member Join Date: Nov 2000 Location: detroit,mi Posts: 27	Go with the Edelbrock intake. It is better than the GT-40. I have only heard good about the Holley but never have known anyone to run it. No, you won't have to buy a new hood.

01-22-2001, 07:23 PM	#4
Noongs94GT Registered Member Join Date: Jan 2001 Location: Marysville, Wa., USA Posts: 8	I think that the Cobra intake for what you have listed as mods would be my prefered intake. It just has the bottom end and the topside that a nat asp requires. If that isnot something you'd be into check out the Holley my buddies 91 notch is using the System max 2 setup and is quite happy with the performance. Good luck and let us know what you decided on. ------------------ 94GT 5spd, Kenne Bell blowing 11psi, Speedbrain, GT-40 Heads w/ 1.77RR, 2031 cam, 30lb injectors, KB Boostapump, Vortech T-Rex, Super FMU,