non egr explorer intake

MidNiteBlu 5.0 · 01-30-2004, 02:43 AM

I am probably going to buy an explorer intake but the guy says it is non egr. and as we all know i probably need egr to pass emissions.

here are a couple pictures

this is what the guy told me:

"Normal intakes run the EGR passage under the intake. Take a look at the second pic in the zip file. The lip below the intake opening is where most EGR passages were run." Also, if you will look at the gaskets in 933 and then the lower in 931, you will see where the EGR passage is supposed to be on a normal gt-40/Cobra intake

I dont know if maybe there is some way i could still run it or not...

Thanks!

tmoss · 01-30-2004, 08:48 AM

You might be able to drill the lower, but there's not much chance of making the upper work as the passage is cast in. I'd sell/trade that one for the early 97 or 96 Explorer intake with the passages. I'm in the process of putting one on my car now.

01-30-2004, 02:43 AM	#1
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	non egr explorer intake I am probably going to buy an explorer intake but the guy says it is non egr. and as we all know i probably need egr to pass emissions. here are a couple pictures this is what the guy told me: "Normal intakes run the EGR passage under the intake. Take a look at the second pic in the zip file. The lip below the intake opening is where most EGR passages were run." Also, if you will look at the gaskets in 933 and then the lower in 931, you will see where the EGR passage is supposed to be on a normal gt-40/Cobra intake I dont know if maybe there is some way i could still run it or not... Thanks! __________________ 91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com

01-30-2004, 08:48 AM	#2
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 634	You might be able to drill the lower, but there's not much chance of making the upper work as the passage is cast in. I'd sell/trade that one for the early 97 or 96 Explorer intake with the passages. I'm in the process of putting one on my car now. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
Installing Explorer Intake	MattwantsSpeed	Windsor Power	16	09-01-2002 10:56 AM
I am new, and I dont know why Explorer Intake manifolds are so swell?	ChesteR	Windsor Power	4	09-29-2001 02:29 AM
explorer intake	myred86gt	Windsor Power	4	09-26-2001 12:18 AM
need advise on explorer intake	joey50gt	Windsor Power	3	04-21-2001 07:22 AM