© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-23-2003, 02:16 AM | #1 |
Registered Member
Join Date: Jun 2003
Location: California
Posts: 6
|
Strange Clicking in 2nd
Hello,
I recently purchased a 1994 Cobra with 68k miles. It's in pretty good condition, and pretty much everything checked out from buyers inspections. However, there is a clicking sound that occurs only in second gear, at any RPM (as long as I am accelerating). The previous owner claimed that the sound was a loose spring that needed to be reattached to a post, on the top of the transmission. But, everyone I have mentioned this to says that they have no clue what he is talking about. Is there a spring above the tranny that corresponds to second gear only? If not, any ideas on what the problem could be? Also, if that is the problem, could it be reached by removing the console and unbolting the shifter? Because needless to say, removal of the transmission is a very tough job, and costs a lot of money to have done at a mechanic. Thank you very much for your help, -94IndyCobra |
06-23-2003, 05:57 AM | #2 |
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
Pulling a t-5 isnt as bad as it sounds, you can save money doing it yourself, i pulled mine 3 times on a dirt/gravel driveway
I hate to tell you this, but my t-5 starting clicking in 2nd and 3rd, it turned out to be the cluster shaft in the t-5, and it finally broke in pieces one day! i drove home with 4th gear only........ oh yea, that guy is probaly full of it, trying to make it sound simple, i dont think there would be a spring on top making a noise. But anyhow, good luck, just be ready for anything with that t-5, could blow tomorrow, could blow next year?
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
06-23-2003, 08:56 PM | #3 |
Registered Member
Join Date: Jun 2003
Location: California
Posts: 6
|
Does anyone have any other ideas on what it the sound could be? Also, would it be possible to reach the top of the tranny (if it were a spring) through the console by unbolting the shifter? Thanks a lot,
-94IndyCobra |
06-23-2003, 10:09 PM | #4 |
Registered Member
Join Date: Aug 2002
Location: Rochester
Posts: 553
|
tranny is damaged. second gear components are damaged and probably has a broken tooth or worn one. Sounds like the tranny was shifted hard from first to second alot. if you hurry and get it repaired you could save yourself the whole tranny rebiuld.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Strange noises, rearend trouble? | KiltedBanshees93GT | Classic Mustangs | 0 | 08-19-2003 08:53 AM |
clicking @ start-up & vibration | kmauldin | Modular Madness | 5 | 11-30-2002 08:52 PM |
Clicking from Head installation? | SlowStang2 | Windsor Power | 4 | 08-09-2001 02:57 PM |
Clicking or chattering sound from under car?! | Andyb | Windsor Power | 2 | 05-29-2001 09:34 PM |
'68 289 Valve Clicking | dep | Classic Mustangs | 7 | 06-27-1999 04:21 PM |