shifter boot.

avbcon12 · 05-03-2002, 03:48 PM

where can i get a shifter boot (the inner rubber one)? i am installing a tri-ax and the old boot is kind cracking. the dealer doesnt have and cant get a lot of mustang parts anymore. where can i find one??

thanks,
adam

Mustang_289 · 05-03-2002, 06:31 PM

you can try a junk yard or online at www.ebay.com. Simply
go to search and type in mustang boot and if there's on online - it'll pop up

explicitone · 05-04-2002, 11:22 AM

You might want to try a diff. dealer I just got one from ford about 6 months ago or the cheaper way and go to the J yard hope you can find one

avbcon12 · 05-04-2002, 12:34 PM

ok thanks guys, the dealer said they have "discontinued" a lot of the fox body stang parts. and cant ever get them again. the whoel resont his came up is because i am putting a tri-ax in and when i took the stock shifter out the boot that is clamped onto the shifter is torn. its like a dust boot or something. i cant find it anywhere online. i do have a lead from someone that says i can order one for a 94 mustang and its the same. so ill try that.

thanks,
adam

Strim91GT · 05-05-2002, 05:42 PM

Mustangs unlimited is your answer. I just ordered one from them about 3 months ago. I had always just been running a whole in the floorboard when i swapped in a tremec tko for my aod. I ordered it from mustangs unlimited and got it 3 days later. along with a new ford motorsport leather shifter boot.

drtbiker · 05-05-2002, 09:41 PM

check out jcwhitney they have a lot of ruber parts; hard to find window channels, all the other molded weather stripping, and lots of stuff for shifters

Chevyguy · 05-06-2002, 10:34 AM

I just got one of those from my Dealer last November. It is true many Fox body parts are going on the obsolete list, my buddy runs a Lincoln Merc body shop and could not get a new door skin. Now our parts are NOS, plenty of em are still out there, lurking in parts bins. Grab em before they get thrown out or end up in the catalog warehouses!@

05-03-2002, 03:48 PM	#1
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	shifter boot. where can i get a shifter boot (the inner rubber one)? i am installing a tri-ax and the old boot is kind cracking. the dealer doesnt have and cant get a lot of mustang parts anymore. where can i find one?? thanks, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

05-04-2002, 11:22 AM	#3
explicitone Registered Member Join Date: Apr 2002 Location: racine ,wi Posts: 691	You might want to try a diff. dealer I just got one from ford about 6 months ago or the cheaper way and go to the J yard hope you can find one __________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________

05-04-2002, 12:34 PM	#4
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	ok thanks guys, the dealer said they have "discontinued" a lot of the fox body stang parts. and cant ever get them again. the whoel resont his came up is because i am putting a tri-ax in and when i took the stock shifter out the boot that is clamped onto the shifter is torn. its like a dust boot or something. i cant find it anywhere online. i do have a lead from someone that says i can order one for a 94 mustang and its the same. so ill try that. thanks, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

05-05-2002, 05:42 PM	#5
Strim91GT Registered Member Join Date: Jan 2001 Location: Kansas Posts: 59	Mustangs unlimited is your answer. I just ordered one from them about 3 months ago. I had always just been running a whole in the floorboard when i swapped in a tremec tko for my aod. I ordered it from mustangs unlimited and got it 3 days later. along with a new ford motorsport leather shifter boot. __________________ vortech s trim,edelbrock 6032's, b303, cobra intake, 70mm tb, pro m 75mm bullet, granatelli alum. rad., accel 330+ digital ign., msd boost tim. ret., 30# inj., 190 lph fuel pump, t-rex pump, bbk, press. reg., tremec tko, ram billet flywheel, dual friction clutch, pro 5.0 shifter, 4.10 gears, aluminum quadrant, motorsport alum. driveshaft, hooker headers, off road h pipe, flowmaster cat back, subframes, megabyte jr lowers, heavy duty uppers, eibach springs drag springs, koni sport shocks, polished cobra r's, 85-86 taillights, msd pro billet distributor

05-06-2002, 10:34 AM	#7
Chevyguy Backyard Mechanic/Chemist Join Date: Feb 2001 Location: Acton MA USA Posts: 435	I just got one of those from my Dealer last November. It is true many Fox body parts are going on the obsolete list, my buddy runs a Lincoln Merc body shop and could not get a new door skin. Now our parts are NOS, plenty of em are still out there, lurking in parts bins. Grab em before they get thrown out or end up in the catalog warehouses!@ __________________ 2001 Crown Vic Maurader Airbox/MAF, DR chip Edel IAS shocks Single exhaust :wtf: 93 P-71 Vic interceptor Backup car now 90 5.0 LX Notch SOLD 74 Chevy Laguna type S-3 454 under construction Currently apart undergoing bodywork.

05-03-2002, 06:31 PM	#2
Mustang_289 Registered Member Join Date: Sep 2001 Posts: 512	you can try a junk yard or online at www.ebay.com. Simply go to search and type in mustang boot and if there's on online - it'll pop up

05-05-2002, 09:41 PM	#6
drtbiker Registered Member Join Date: Jan 2002 Location: Mt. Prospect,IL Posts: 474	check out jcwhitney they have a lot of ruber parts; hard to find window channels, all the other molded weather stripping, and lots of stuff for shifters

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
shifter cable question	82 GT	Windsor Power	3	05-25-2004 10:03 PM
No Need for Aftermarket Shifter after this Mod !!	Katmandu	Windsor Power	6	03-24-2004 06:07 PM
what would you ask for for christmas??	lx5091	Windsor Power	28	11-22-2002 10:52 AM
Pro 5.0 Shifter problem	TomEboi	Modular Madness	1	05-26-2002 09:18 PM
Mac shifter install questions	Chevyguy	Windsor Power	5	10-22-2001 03:01 PM