Fuel pressure? - Page 3

jimberg · 05-30-2001, 03:50 PM

Quin, it's funny that you said that because I was thinking the same thing as a wrote it.

I got that number somewhere on the web. It's probably a conversion from grams to lbs. I said "about" since all fuels have different weights.

I think if the ignition were set up improperly, the car would run poorly throughout the power band. When I first set mine up I forgot to hook up the retard line and it completely bogged at WOT. It's worth looking at, though.

My own suspicion is that it is a mismatch of components. B303 cam with 1.7rr rockers stock heads and intake with 70mm TB and 76mm MAF.

------------------
351W 89 Mustang GT Convertible

poopstang · 05-30-2001, 05:11 PM

My poping sound was there before i installed my ignition system

Can anyone tell which MAF to get 73mm or 76mm, whats the difference beside the size. why would i buy a 73mm when i could get a 76mm?
Advise?

jimberg · 05-30-2001, 06:06 PM

I think what you have is correct for your throttle body. You need to get new heads and an intake to support the air flow as well as modify exhaust.

------------------
351W 89 Mustang GT Convertible

poopstang · 05-30-2001, 06:18 PM

OK here are all my mods,
1 5/8 headers, off-road h-pipe, dynamax muffs, no-smog pump, no-A/C, pullies, b303, 1.7's, 70mmTB, ported upper and lower intake, shave heads(.020) and block(.020)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Pump Pressure?	Swarzkopf1	Windsor Power	3	08-31-2004 02:07 PM
fuel pressure issues	mustang98gt	Modular Madness	3	07-05-2003 10:43 PM
Rising Fuel Pressure with Rising RPM?	StreetStang37	Windsor Power	1	05-21-2002 03:49 AM
Fuel pressure at high altitude. etc...	Dark_5.0	Windsor Power	5	04-19-2002 07:52 AM
Please Help...Fuel pressure keeps moving.	Dark_5.0	Windsor Power	2	04-06-2002 01:31 AM

05-30-2001, 03:50 PM	#41
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	Quin, it's funny that you said that because I was thinking the same thing as a wrote it. I got that number somewhere on the web. It's probably a conversion from grams to lbs. I said "about" since all fuels have different weights. I think if the ignition were set up improperly, the car would run poorly throughout the power band. When I first set mine up I forgot to hook up the retard line and it completely bogged at WOT. It's worth looking at, though. My own suspicion is that it is a mismatch of components. B303 cam with 1.7rr rockers stock heads and intake with 70mm TB and 76mm MAF. ------------------ 351W 89 Mustang GT Convertible

05-30-2001, 05:11 PM	#42
poopstang Registered Member Join Date: Mar 2001 Location: palmbayFL Posts: 184	My poping sound was there before i installed my ignition system Can anyone tell which MAF to get 73mm or 76mm, whats the difference beside the size. why would i buy a 73mm when i could get a 76mm? Advise?

05-30-2001, 06:06 PM	#43
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	I think what you have is correct for your throttle body. You need to get new heads and an intake to support the air flow as well as modify exhaust. ------------------ 351W 89 Mustang GT Convertible

05-30-2001, 06:18 PM	#44
poopstang Registered Member Join Date: Mar 2001 Location: palmbayFL Posts: 184	OK here are all my mods, 1 5/8 headers, off-road h-pipe, dynamax muffs, no-smog pump, no-A/C, pullies, b303, 1.7's, 70mmTB, ported upper and lower intake, shave heads(.020) and block(.020)