© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-06-2003, 06:55 AM | #1 |
Registered Member
Join Date: May 2003
Posts: 86
|
Location of relays or 2nd fuseblock?
I have an 83'. I found the fuseblock under the steering wheel just to the left. Is there another fuseblock or relay panel or is this the only one. I bought a Haynes manual but it doesn't have as much info as I thought it would.
|
06-06-2003, 12:25 PM | #2 |
Registered Member
Join Date: Sep 2002
Location: Boston
Posts: 592
|
I have a 91, which I know is a completely different beast, but here is how they wire mine up:
1. Most of the fusing happens under the dash where you are looking. If you poke your head further up under the steering column, you will find various other relays scattered on or abouts that area, mostly bolted to the column reinforcement. These are for the horn and so forth. 2. There is a pack of fusible links near where the starter solenoid is behind the battery. This is the "other" cluster you seek. They're inline with the + wires coming off the "on" side of the solenoid I think thats pretty much it. There are relays under the seat, but you have a mechanical fuel pump, so you wont find them and the eec has a ton of relays in the passenger side kick panel, but you likewise dont have an eec. The radio/amp has a pair of relays I believe, inline with it's wiring, attached to the outer side of the pedal bracket to the left and above where the radio sits. The A/C relays are on the passenger side of the engine bay near where a fuelie would have it's air cleaner Hope this helps somewhat!
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mounting location for msd 6A | GhettoPop | Windsor Power | 28 | 02-23-2004 01:37 PM |
dip stick location on a 302 front sump | ScottA40422 | Classic Mustangs | 8 | 07-23-2003 05:20 AM |
Has anyone ever switched around the location of their radio and Ac controls? | Blown 306 | Blue Oval Lounge | 2 | 08-05-2002 07:51 AM |
chip location? | ercool | Windsor Power | 1 | 04-25-2001 04:46 PM |