roller rockers clitty clattenin'!?

stanger8172 · 01-23-2001, 12:05 PM

is it o.k. to run these guys loose for a little while? They)1.6 rr's) are not that loud once she's warmed up.

------------
'91 LX 5.0 HO,ported,polished,milled stock heads,1.6 roller rockers, 1.94/1.60 stainless valves,triple valve springs,K&N,short-belt,glasspacks,dumps

gofastlx · 01-23-2001, 12:14 PM

I would take the time to set the lash on them, or remove the shims that are causing them to clatter. Mine clattered the other day, but I hadn't started my car in weeks..Normally they will clatter a bit, but they are not distinguishable from other engine sounds..Check them out b4 you run into problems

Rob

stanger8172 · 01-23-2001, 12:44 PM

Thanx, I'll have 'em checked A.S.A.P. Does that make a difference since I have had them for about 5000 miles on a highway driven car? -----------
'91 LX 5.0 HO,ported,polished,milled stock heads,1.6 roller rockers, 1.94/1.60 stainless valves,triple valve springs,K&N,short-belt,glasspacks,dumps,3200 lbs.

01-23-2001, 12:05 PM	#1
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	roller rockers clitty clattenin'!? is it o.k. to run these guys loose for a little while? They)1.6 rr's) are not that loud once she's warmed up. ------------ '91 LX 5.0 HO,ported,polished,milled stock heads,1.6 roller rockers, 1.94/1.60 stainless valves,triple valve springs,K&N,short-belt,glasspacks,dumps

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roller rockers for stock heads	QuantumMotorsports	Windsor Power	1	07-14-2003 03:15 PM
Roller Rockers, bad?	HiFlow5 0	Windsor Power	1	04-14-2002 01:35 PM
roller rockers	bobtodd	Windsor Power	4	04-07-2002 01:34 PM
reg rockers or roller rockers??	Chevysucks	Windsor Power	1	12-05-2001 08:17 PM
Valve Springs & Roller Rockers	StreetStang37	Windsor Power	4	04-17-2001 03:54 AM

01-23-2001, 12:14 PM	#2
gofastlx Registered Member Join Date: Jan 2001 Location: Rochester Hills, MI Posts: 40	I would take the time to set the lash on them, or remove the shims that are causing them to clatter. Mine clattered the other day, but I hadn't started my car in weeks..Normally they will clatter a bit, but they are not distinguishable from other engine sounds..Check them out b4 you run into problems Rob

01-23-2001, 12:44 PM	#3
stanger8172 Registered Member Join Date: Nov 2000 Location: Milwaukee,Wisconsin Posts: 380	Thanx, I'll have 'em checked A.S.A.P. Does that make a difference since I have had them for about 5000 miles on a highway driven car? ----------- '91 LX 5.0 HO,ported,polished,milled stock heads,1.6 roller rockers, 1.94/1.60 stainless valves,triple valve springs,K&N,short-belt,glasspacks,dumps,3200 lbs.