options for a stroker in a '66 fastback

Rhauf · 06-02-2009, 01:07 AM

Recently a friend asked me to help him with an engine build for the '66 fastback he recently acquired. So far it looks like it's going to be a 351w stroked to 408, naturally aspirated and carb'd, with compression in the 10:1 range. We're hoping for good power up to 6000 rpm. the heads I'm thinking of going with are the AFR's in either 185cc, or 205cc. would 205's be too big for good torque? Also, anyone have a (preferably roller) cam they have used and liked in a similar build? a little muscle-car idle would be a definite plus in the cam.

goodyear1984 · 07-24-2009, 07:35 PM

well i would go with the 205.185 are good for a 347 stroker.205 heads should be nice ...if u were really gonna drag it id go bigger than 205 and crank it to 7500 or more.i can give u a phone number for a cam shop.the cams are 290 bucks shipped,,

06-02-2009, 01:07 AM	#1
Rhauf Registered Member Join Date: Jan 2001 Location: Ojai, CA Posts: 19	options for a stroker in a '66 fastback Recently a friend asked me to help him with an engine build for the '66 fastback he recently acquired. So far it looks like it's going to be a 351w stroked to 408, naturally aspirated and carb'd, with compression in the 10:1 range. We're hoping for good power up to 6000 rpm. the heads I'm thinking of going with are the AFR's in either 185cc, or 205cc. would 205's be too big for good torque? Also, anyone have a (preferably roller) cam they have used and liked in a similar build? a little muscle-car idle would be a definite plus in the cam. __________________ -1968 Mustang Coupe- 302 roller, gt-40Ys, E-303, t-5

07-24-2009, 07:35 PM	#2
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: options for a stroker in a '66 fastback well i would go with the 205.185 are good for a 347 stroker.205 heads should be nice ...if u were really gonna drag it id go bigger than 205 and crank it to 7500 or more.i can give u a phone number for a cam shop.the cams are 290 bucks shipped,, __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'super' stroker vs 'budget' stroker	mike5p01	Windsor Power	4	10-11-2003 10:11 PM
What are my options?	Jaegermeister2k	Modular Madness	4	08-21-2003 04:00 PM
'68 paint options	unknown	Classic Mustangs	1	11-08-2002 02:06 AM
t45 options	miker615883401	Modular Madness	0	02-09-2001 03:40 PM
N2O options?	84_GT350	Windsor Power	2	01-21-2001 09:55 PM