alot of questions??

powerdyne 5.0 · 04-18-2004, 08:15 PM

Ok, first off I will tell you what i have on my car. pwerdyne s/c 9lb, headers, x-pipe, catback,24 lb injectors, pro m 75mm, tko, 3.55 gear , adjustable feul reg. stock motor. Now, her is my problem. When my i get on my car above 4750 rpm it seems to surge. I can feel my car try to go faster but it just kind of feels like i have bent rims, but there not. its hard to explane. Could my lifters be bad, leaky injector??? I really have no idea. I just know it happens at high rpm when i get on it?? Oh and my boost gauge only says 5-6 lbs of boost.

Stang_Crazy · 04-18-2004, 09:08 PM

I don't see any mention of a bigger than stock fuel pump....maybe it's the pump? what does your fuel pressure look like when the car begins to surge?

As for the boost gauge, where are you getting your vacuum source from?

powerdyne 5.0 · 04-19-2004, 09:38 PM

I have a 190lph pump, I have the boost hooked up to the line that the comes off fo the fmu.

04-18-2004, 08:15 PM	#1
powerdyne 5.0 Registered Member Join Date: Feb 2004 Location: alpharetta,GA Posts: 19	alot of questions?? Ok, first off I will tell you what i have on my car. pwerdyne s/c 9lb, headers, x-pipe, catback,24 lb injectors, pro m 75mm, tko, 3.55 gear , adjustable feul reg. stock motor. Now, her is my problem. When my i get on my car above 4750 rpm it seems to surge. I can feel my car try to go faster but it just kind of feels like i have bent rims, but there not. its hard to explane. Could my lifters be bad, leaky injector??? I really have no idea. I just know it happens at high rpm when i get on it?? Oh and my boost gauge only says 5-6 lbs of boost. __________________ 93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body

04-18-2004, 09:08 PM	#2
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	I don't see any mention of a bigger than stock fuel pump....maybe it's the pump? what does your fuel pressure look like when the car begins to surge? As for the boost gauge, where are you getting your vacuum source from? __________________ ~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11

04-19-2004, 09:38 PM	#3
powerdyne 5.0 Registered Member Join Date: Feb 2004 Location: alpharetta,GA Posts: 19	I have a 190lph pump, I have the boost hooked up to the line that the comes off fo the fmu. __________________ 93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine swapping questions	bmxmon	Classic Mustangs	3	08-07-2004 02:16 PM
questions about my new 65 mustang	bmxmon	Classic Mustangs	2	03-31-2004 07:13 PM
New Gears, Install, and Questions	B2r3y	Windsor Power	6	02-21-2003 05:00 PM
Alot of Questions About Modular Motors	vetteeatr	Modular Madness	2	07-01-2002 03:44 PM
Questions	Rosco	Windsor Power	23	03-16-2002 01:28 AM