![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Jun 2003
Location: Chicago
Posts: 73
|
![]() Can I jus take it off and put a shorter belt on? How much HP will this free up? Is it worth it?
__________________
My Cardomain Website |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
![]() It will free up "0" HP. Unless you race with the a/c on.
No you cant just run a shorter belt. You either have to buy the a/c eliminator bracket or bypass both the a/c and power steering.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Sep 2002
Location: Boston
Posts: 592
|
![]() I agree that the actual _hp_ gain is zero but trashing the compressor, that huge bracket, all the tubes, condenser and all that junk is easily about 100 lbs. You will feel the difference if you remove the setup altogether. Car will actually feel a bit lighter. They make an A/C delete kit that moves the PS pump down to where the A/c compressor is and makes a small brace between the PS and the waterpump. Dont get one of those stupid replacement idlers. If you're gonna remove something remove it.
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Mar 2002
Location: Lakewood, Wa
Posts: 161
|
![]() The bracket is not that expensive. Here's some pics for you
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Mar 2002
Location: Lakewood, Wa
Posts: 161
|
![]() Crap
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Mar 2002
Location: Lakewood, Wa
Posts: 161
|
![]() again
__________________
'77 Aspen R/T: 318 w/273 heads, 4spd, Hurst Shifter, 600 holley, edelbrock intake, 8 3/4 axle, 3.23 sure-grip, dual 3" exhaust, MP cam 276 / 276 duration 490 / 490 mech solid lifter, Super Stock Springs (15.65@88 3900lbs) '91 Mustang LX: .030 Bored, Typhoon Intake, 4.10's, Lentech VB, BBK 70mm TB, FMS A/C elim bracket, 19lbs inject, off road H-pipe, 75mm pro-m MAF, FRP unequal shorty, stormin normin hood. 3420 Lbs w/ 220 (me) and 13 gal gas. '02 SS Camaro |
![]() |
![]() |
![]() |
#7 |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
![]() I belive it is $45 from Jegs
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket ![]() ![]() ![]() "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" ![]() |
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Nov 2003
Location: Provo, UT
Posts: 19
|
![]() I removed the AC mostly just becasue it was annoying and in the way. ANyhow.. if it's hot.. I take the T-top off or drive my Neon. I didn't use a delete kit and made a nice clean removal. Ripped all the plumbing, pump and stuff out for weight reduction, and I found directions on how to reverse the tension pulley bracket to reverse tension. I will post the link to these directions when I get home from work. Also, I just dremmeled away at unneccesary extension on the old bracket and grinded it smooth and it looks nice. I just like how it opens so much space under the hood for tinkering and looks.
__________________
[img]http://kolby.mysitespace.com/Pictures/Howdy.jpg [/img] Tired of the tuner world, time for some Domestic Muscle. |
![]() |
![]() |
![]() |
#9 |
Registered Member
Join Date: Nov 2003
Location: Provo, UT
Posts: 19
|
![]() Ok, I'm home now! I translate German communications at my work, and since they are 8 hours ahead of me here, I work 11pm to 7am. ANyhow ... here are the links for the AC removal w/o kit.
**This is the belt pattern and photos** http://www.geocities.com/motorcitymu...-c_delete.html **This is how to reverse your belt tensioner yourself** http://www.angelfire.com/ns/PurgingP...tensioner.html .. AND PLEASE... cut that nasty bracket off that he just painted on the site!!
__________________
[img]http://kolby.mysitespace.com/Pictures/Howdy.jpg [/img] Tired of the tuner world, time for some Domestic Muscle. |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
|
![]() Contrary to what some people said i doubt you will notice any difference. Its about 70lbs off the front which will help but its not gonna "make the car feel lighter". As far as the bracket, go to the local pick a part and find a car without ac and there you go. Alot cheaper than paying 50 for the exact same thing from ford or jegs. As was said you wont notice any hp gain since it only drags while its on and some cars even disengage the clutch when your at WOT so that you do still have that extra few ponies to pass. But its definately something to do and it will probably give you around a 10th in the 1/4.
__________________
Fast Company |
![]() |
![]() |
![]() |
#11 |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
![]() I could care less about ac. I took mine off just to get that ugly *** thing out of the way. I am sure you all agree that the engine compartment looks a lot cleaner without the ac. And a whole lot cleaner with only a alternator and water pump bolted to the front.
I did the belt tensioner reversal thing. Works great!!! Just use your stock belt, route it like you want it, and mark it where the two ends would be. Measure between the marks you made, and go to the auto parts and tell them you want a XX" belt 6 rib. My brother's 302 uses a 55" belt I think. My 351 uses a 73.5" with ps. If you want some pics, I could post them.
__________________
The sig says it all. ![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing Fuel Rails?? NEED HELP ASAP | 5.0 Pony | Windsor Power | 4 | 06-12-2003 02:24 AM |
Removing A/C | bobtodd | Windsor Power | 8 | 04-27-2002 09:57 PM |
installing a cam without removing engine | vetteeatr | Windsor Power | 7 | 01-24-2002 01:38 AM |
Installing Electric Fan and Removing AC | SmokeyDP | Windsor Power | 3 | 03-09-2001 07:10 PM |
can i inst. rocker arms without removing lifters? | rob90gt | Windsor Power | 3 | 02-02-2001 04:09 AM |