© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-04-2001, 07:45 PM | #1 |
Registered Member
Join Date: Sep 2000
Location: Fresno,CA. USA
Posts: 384
|
what to do w/ 2.02 valves??? help!
I got my heads that were supposed to be 1.90/1.60
they are 2.02/1.60 What can i do.....running out of cash fast ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com |
04-04-2001, 10:30 PM | #2 |
Sniffed too much n20
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
|
If you can, get the tool that you can flycut your pistons with. Check your clearance tho, some heads and cams do fit, but make sure. Otherwise, and not really recommended but will do the job, get a good bit for a Dremel and cut the valve reliefs for the pistons out.
|
04-04-2001, 11:32 PM | #3 |
Registered Member
Join Date: Mar 2001
Location: Gainsville,Fl
Posts: 229
|
The only problem with cutting them yourself, is that if you cut them by hand, you'll have no way of knowing how you affected the pistons weight. You can throw the balance off
|
04-05-2001, 02:27 AM | #4 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
what heads? cam etc?
Sky ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph Runs on 87 Octane and gets 24mpg! |
04-05-2001, 10:03 AM | #5 |
Dirk Diggler
Join Date: Feb 1999
Location: SLOATSBURG, NY
Posts: 1,931
|
i would turn those baby's in for a set of 1.9's..i was never a fan of 302's with 2.02 with the xception of the afr 185..you need alot of intake/tb and some cam to make the 2.02 work like they are soposed to
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. AIM=onesillynotch |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Who carries ferrera valves? Is a stratched valveface salvagable? | crazypete | Windsor Power | 3 | 07-30-2004 08:26 PM |
2.02 valves GT40X Heads ? | T5superduty | Windsor Power | 0 | 10-24-2003 02:11 AM |
adjusting valves/ stud mount?? PKRWUD? Anyone?? | Simi Stang | Windsor Power | 8 | 07-08-2003 11:43 AM |
Pistons for Larger Valves? | MustangChile | Classic Mustangs | 4 | 02-28-2003 01:27 AM |
Who's flycut stock pistons for 2.02 intake valves? | jmx2 | Windsor Power | 9 | 09-05-2001 07:59 AM |