Clutch alignment tool? where do i get one?

Coupe50h · 09-09-2002, 12:24 PM

My clutch didnt come with one, should have,

but does autozone carry these? thought id ask here first since i'll get a reply faster than autozone will answer their phone

thanx mw folks.

Kamaro Killer · 09-09-2002, 12:54 PM

I got mine from Kragen (Checkers) It is a little plastic tool that's about 6 in long. It should only cost 7-10 dollars. Keith

302 LX Eric · 09-09-2002, 01:43 PM

I got mine at Advanced Autoparts for like $3.

Hope this helps,
E

PKRWUD · 09-09-2002, 01:56 PM

You have one in your hands every time you sweep up your garage.

Take care,
~Chris

jimberg · 09-09-2002, 03:10 PM

Quote:

You have one in your hands every time you sweep up your garage.

You old-pro, you.

I just got one of those universal clutch alignment tools. It has different bushings on the end for different size pilot bearings.

Coupe50h · 09-09-2002, 06:00 PM

Quote:

Originally posted by 302 LX Eric
I got mine at Advanced Autoparts for like $3.

Hope this helps,
E

Yes it does, thnx everyone, including pkrwd you old pro

only thing stopping me now is the rain and flooding, heck i'll drop that t-5 in the mud if i have to, right now im driving a company truck we call the "turd" if you catch my drift

09-09-2002, 12:24 PM	#1
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Clutch alignment tool? where do i get one? My clutch didnt come with one, should have, but does autozone carry these? thought id ask here first since i'll get a reply faster than autozone will answer their phone thanx mw folks. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

09-09-2002, 12:54 PM	#2
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	Autozone should have one I got mine from Kragen (Checkers) It is a little plastic tool that's about 6 in long. It should only cost 7-10 dollars. Keith __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

09-09-2002, 01:43 PM	#3
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Advanced Auto has got them I got mine at Advanced Autoparts for like $3. Hope this helps, E __________________ 1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60'

09-09-2002, 01:56 PM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	You have one in your hands every time you sweep up your garage. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Loud "pop" after clutch install, won't go into gear..	Chris_H	Windsor Power	3	08-11-2003 06:24 PM
T-5 swap & cable clutch problem	LuvMyStang	Classic Mustangs	0	03-19-2003 08:47 AM
'65 - Pull Away Problems - Action Plan	geordie	Classic Mustangs	0	05-14-2002 01:43 PM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long)	beefcake	Blue Oval Lounge	2	02-23-2001 03:05 PM
Do I need to use pressure plate alignment dowels with clutch install?	TROYXTROY	Windsor Power	4	01-25-2001 02:12 PM