© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
09-20-2002, 09:40 PM | #1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
smoke out the breather valve!!
Does it mean that the rings are shot if there is smoke coming out from around the breather valve?
It started doing this on my '82. Should I start planning on a rebuild for the winter? It's coming from the left breather valve and left tailpipe. I'm thinking it's the rings.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
09-21-2002, 07:44 AM | #2 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
ttt
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
09-21-2002, 11:58 AM | #3 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
First off, anything coming out of one valve cover should be coming out of the other as well. if it's not, I would suspect an unusually hot spot on that head, or a problem with the oil delivery in one or more pushrods on that side.
Take care, ~Chris
__________________
Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local
RED & WHITE! |
09-21-2002, 02:01 PM | #4 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Yeah, you're right. It's also out the other valve cover as well. I just noticed it.
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Victor Jr. manifold is in - have questions about breather cap on valve covers | Stang_ROTY | Windsor Power | 2 | 08-19-2004 09:39 PM |
Need tall valve covers + breather tube | Hozer 88GTConv | Windsor Power | 0 | 01-31-2004 10:58 AM |
valve cover to TB hose?? | Simi Stang | Windsor Power | 11 | 12-22-2003 02:12 AM |
Is a valve cover breather bad for the 4.6???? | 96_4.6 | Modular Madness | 6 | 08-21-2003 06:38 PM |
Valve cover breather and oil? | rbatson | Windsor Power | 5 | 03-20-2001 11:38 PM |