car lift or no?

90lxracer · 11-04-2002, 06:38 PM

If i am installing longtube headers in my 90 lx, can i use jack stands or will i have to go somewhere with a car lift? What did you guys do?

WADS56 · 11-04-2002, 06:47 PM

I put the car on jack stands, and used a engine lift to raise th motor.

Cannon · 11-04-2002, 06:52 PM

I put my car on jack stands, didnt have to lift the motor at all, although I went trhough quite a time to get those things in there.

good luck !

90lxracer · 11-04-2002, 08:03 PM

alright....i appreciate it.

11-04-2002, 06:38 PM	#1
90lxracer Registered Member Join Date: Oct 2002 Location: houston, Texas Posts: 65	car lift or no? If i am installing longtube headers in my 90 lx, can i use jack stands or will i have to go somewhere with a car lift? What did you guys do? __________________ 1990 lx 5.0L 5 spd. BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/ pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys 1997 Chevy Silverado Z71 4x4 6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges

11-04-2002, 06:47 PM	#2
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	I put the car on jack stands, and used a engine lift to raise th motor. __________________ 79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor 93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe Ricer hater's club member #49

11-04-2002, 08:03 PM	#4
90lxracer Registered Member Join Date: Oct 2002 Location: houston, Texas Posts: 65	alright....i appreciate it. __________________ 1990 lx 5.0L 5 spd. BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/ pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys 1997 Chevy Silverado Z71 4x4 6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South Side Machines Lift Bars.....	cucho	Windsor Power	7	01-29-2004 10:51 PM
stock gt40p lift and high lift cams	homeroV8	Windsor Power	0	11-28-2002 10:34 AM
cam lift question	redsn95vert	Windsor Power	1	04-28-2001 09:58 PM
SSM lift or Lakewood lift bars	ponypower	Windsor Power	10	02-11-2001 07:26 AM

11-04-2002, 06:52 PM	#3
Cannon Registered Member Join Date: Feb 1999 Location: Boston, Ma Posts: 52	I put my car on jack stands, didnt have to lift the motor at all, although I went trhough quite a time to get those things in there. good luck !