turbo( mass air or speed density

faststang90 · 11-18-2002, 09:53 PM

i got a turbo im putting on my car would it run better with a mass air meter or go speed density

Eric4Nitrous · 11-18-2002, 10:15 PM

Mass air definately. you can't really tune that well on a speed density car. With mass air at least you can have better tuning capabilities.

88workcar · 11-19-2002, 05:53 AM

I think that I have done more with SD than most people here, but if you get a turbo to work with it I will have to bow down to you. I have been a turbo fan for a long time, and one day I will have one on the car. I have too of them here now but I don't think that either will be a good one to use. Do you have a kit or a JY turbo. Most people get a stand alone or a twEECer. The twEECer is cheap and works well, But it works with Mass Air. If you have to buy both, the cost may be more than the stand alone. Check on turbomustangs.com they know some stuff.

faststang90 · 11-19-2002, 07:05 AM

im a nos person so im just playing with this turbo tring to get it to run the best it can with as little cash as i can spend cause im in the middle of getting a 408 done. its a jy kit got it off a guy that had it on a 4 door fairmont it didnot have much done to it and it ran a 10.50 @130 spraying 125 out of the hole with a e cam and some world product heads

11-18-2002, 09:53 PM	#1
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	turbo( mass air or speed density i got a turbo im putting on my car would it run better with a mass air meter or go speed density

11-18-2002, 10:15 PM	#2
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	Mass air definately. you can't really tune that well on a speed density car. With mass air at least you can have better tuning capabilities. __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

11-19-2002, 05:53 AM	#3
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I think that I have done more with SD than most people here, but if you get a turbo to work with it I will have to bow down to you. I have been a turbo fan for a long time, and one day I will have one on the car. I have too of them here now but I don't think that either will be a good one to use. Do you have a kit or a JY turbo. Most people get a stand alone or a twEECer. The twEECer is cheap and works well, But it works with Mass Air. If you have to buy both, the cost may be more than the stand alone. Check on turbomustangs.com they know some stuff. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

11-19-2002, 07:05 AM	#4
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	turbo im a nos person so im just playing with this turbo tring to get it to run the best it can with as little cash as i can spend cause im in the middle of getting a 408 done. its a jy kit got it off a guy that had it on a 4 door fairmont it didnot have much done to it and it ran a 10.50 @130 spraying 125 out of the hole with a e cam and some world product heads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
speed density to mass air	gmhatr	Windsor Power	1	07-03-2004 10:09 PM
How do I know if i have speed density or Mass Air	RoushRacing6N17	Windsor Power	2	02-26-2004 08:56 AM
Speed Density to MASS Air	Bobasaurus	Windsor Power	2	05-07-2002 06:36 PM
Carb to EFI: Speed Density or Mass Air?	Chris in NY	Windsor Power	7	10-12-2001 03:23 AM
Goodbye Speed Density, Hello Mass Air?	Sac68	Windsor Power	17	01-22-2001 10:39 PM