351 C Questions

Patrick Boetticher · 12-16-2002, 02:15 PM

the kid up the street just bought a 351 C he wants to inject it.. is there a Fuel injection setup for it?

thanks!
patrick...

PKRWUD · 12-16-2002, 02:30 PM

Not from the factory, but I would suspect that someone makes an aftermarket kit for them.

The Deuce · 12-16-2002, 02:43 PM

Hilborn used to, if I'm not mistaken.

Patrick Boetticher · 12-16-2002, 03:55 PM

i know it wasnt made from the factory.... just after market....

87BOSS351C · 12-16-2002, 04:44 PM

It is not very practical from a $$ standpoint unless you use the Holley Pro-jection set up. I was looking at doing multi-port on my cleveland and it would have cost around $4000 for everything, modified single plane intake, injectors, fuelrails, throttle body, computer, fuel pump... it added up way to quick for me. I think the company that modifies the intakes was called Force Fuel Injection. They have a web page somewhere. Also check out the best Cleveland forum on the web,

http://www.network54.com/Hide/Forum/119419

You may have to copy and paste that.

There is also a site about modifying a 351W setup on to a 2V C at,

http://www.detomaso.nu/~thomast/efi/

I have a 4V so that wasn't an option for me. I hope this helps out.

Shaggy · 12-16-2002, 05:46 PM

You can use the spyder intake www.promustang.com

Patrick Boetticher · 12-17-2002, 02:25 PM

any other leads???

12-16-2002, 02:15 PM	#1
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	351 C Questions the kid up the street just bought a 351 C he wants to inject it.. is there a Fuel injection setup for it? thanks! patrick... __________________ Mustang Sold 2003 Ranger Edge

12-16-2002, 02:30 PM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Not from the factory, but I would suspect that someone makes an aftermarket kit for them. __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-16-2002, 02:43 PM	#3
The Deuce Registered Member Join Date: Apr 2002 Location: Atlanta, GA Posts: 2,325	Hilborn used to, if I'm not mistaken. __________________ 1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60' 1995 Honda VFR750 - not much @ really fast (actual data pending.) 1964.5 Mustang 289 Rice Haters Club Member #13

12-16-2002, 03:55 PM	#4
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	i know it wasnt made from the factory.... just after market.... __________________ Mustang Sold 2003 Ranger Edge

12-16-2002, 04:44 PM	#5
87BOSS351C Registered Member Join Date: Sep 2002 Location: Midland, Michigan Posts: 92	It is not very practical from a $$ standpoint unless you use the Holley Pro-jection set up. I was looking at doing multi-port on my cleveland and it would have cost around $4000 for everything, modified single plane intake, injectors, fuelrails, throttle body, computer, fuel pump... it added up way to quick for me. I think the company that modifies the intakes was called Force Fuel Injection. They have a web page somewhere. Also check out the best Cleveland forum on the web, http://www.network54.com/Hide/Forum/119419 You may have to copy and paste that. There is also a site about modifying a 351W setup on to a 2V C at, http://www.detomaso.nu/~thomast/efi/ I have a 4V so that wasn't an option for me. I hope this helps out. __________________ Black '87 LX 5.0 5 spd T-top with 450hp '71 351 Cleveland 4V, C6 tranny, "and some other stuff" Rice Haters Club Member #124

12-16-2002, 05:46 PM	#6
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	You can use the spyder intake www.promustang.com __________________ A good plan, violently executed now, is better than a perfect plan next week. George S. Patton, General (1885-1945)

12-17-2002, 02:25 PM	#7
Patrick Boetticher Registered Member Join Date: Feb 1999 Location: Camarillo/Thousand Oaks Ca Posts: 223	any other leads??? __________________ Mustang Sold 2003 Ranger Edge

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just got a 98, have some questions?	98GTNewbie	Modular Madness	5	08-30-2003 12:41 AM
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 12:40 PM
Several questions about oil.	zepherman	Windsor Power	3	08-03-2002 06:59 AM
HELP! Newbie 95-96 GT questions	Ron Brooks	Blue Oval Lounge	7	07-11-2001 07:38 PM
S/R Questions	DAMION	Racer's Club House	1	09-30-1999 11:02 AM