Need recommendation for a high yorque starter for 351 windsor

ciara · 12-30-2002, 03:52 PM

I need a high torque starter for my 351. I had a CVR starter and it did not work so I sent it back. Are there any out there that just bolt on and don't have a 18 settings you have to try until you find the one that works? Any reccomendations would be greatly appreiciated. Also let me know where you got it. Thanks

82 GT · 12-30-2002, 04:55 PM

Get a starter from a 1994-95(I think it's those years). They are smaller, lighter and high torque. They bolt right up to the 351w but you have to switch some wire around for it to work.

mustang man · 12-30-2002, 06:28 PM

I bought a starter from summit racing for my 408 stroker works great

Eric4Nitrous · 12-30-2002, 06:32 PM

I run a CSI mini starter. Spins my 16:1 motor over like a breeze.

Kevin Price · 12-31-2002, 10:36 AM

Just buy a Ford high torque or super high torques starter from an SVO dealer. Way cheaper than the CVR or CSI and cranks great. At least on my 14.5:1 motor. Summit sells them too.

Nutty 5.0 · 01-01-2003, 09:09 PM

Try

www.pa-performance.com

They have the mini starters too. Cheaper than even a FRPP unit.

12-30-2002, 03:52 PM	#1
ciara Registered Member Join Date: Jan 2002 Posts: 100	Need recommendation for a high yorque starter for 351 windsor I need a high torque starter for my 351. I had a CVR starter and it did not work so I sent it back. Are there any out there that just bolt on and don't have a 18 settings you have to try until you find the one that works? Any reccomendations would be greatly appreiciated. Also let me know where you got it. Thanks

12-30-2002, 04:55 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Get a starter from a 1994-95(I think it's those years). They are smaller, lighter and high torque. They bolt right up to the 351w but you have to switch some wire around for it to work. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

12-30-2002, 06:28 PM	#3
mustang man Registered Member Join Date: Sep 1998 Location: Poy Sippi Wi. Posts: 111	I bought a starter from summit racing for my 408 stroker works great __________________ 87LX 351W, avenger heads, hooker headers, dynomax super turbo's, lots of other stuff to go fast

12-30-2002, 06:32 PM	#4
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	I run a CSI mini starter. Spins my 16:1 motor over like a breeze. __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

12-31-2002, 10:36 AM	#5
Kevin Price Registered Member Join Date: Jan 1999 Location: Oxford, KS Posts: 935	Just buy a Ford high torque or super high torques starter from an SVO dealer. Way cheaper than the CVR or CSI and cranks great. At least on my 14.5:1 motor. Summit sells them too. __________________ 2001 Mustang "Mach 1" SVO siamesed 351 stroked to 417ci,Yates heads, solid roller,Trans King glide. Best 1/4 ET 9.17 (ALL MOTOR) Best 1/4 MPH 147 My Car

01-01-2003, 09:09 PM	#6
Nutty 5.0 Registered Member Join Date: Apr 2000 Location: Collegeville, Pa, USA Posts: 75	Try www.pa-performance.com They have the mini starters too. Cheaper than even a FRPP unit. __________________ 93 GT Red/Grey B50 8.5:1 block, S trim, 2.95 pulley, 6037 heads, Crane Interceptor 2, Comp XE276HR cam, BBK longtubes, Mac catback, Holley Systemax II intake, Kirban fuel regulator, Accufab 70mm t.b., 80mm Pro-M meter, 36lb. injectors, 1.7 roller rockers, FMS C springs, Factory Five upper and lower control arms, Real Ford Cobra R wheels, 3.73 gears, M2300K cobra 4 wheel disk brakes. 505rwhp/472rwtq with home tune! 2/03 5.0 Mustangs and Super Fords magazine feature car page #166 8/02 MM/FF Feature Car page #102

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Putting in clutch pedal after starter install now produces very high pitched whine	crazypete	Windsor Power	3	08-18-2003 08:51 PM