GT-40 heads and more

Shotgun28 · 01-17-2001, 08:30 AM

Well I think I have decided to go slightly mild to medium modded and from what I have read from other stangers I am going to go with the GT-40P heads and down the road get them ported, but after looking through my recent mags, I cannot find a place to get these heads, I will be getting the Cobra intake and a larger T/B like 65MM, I think 70 may be too large for my application and then get a 73 C & L MAF or a Pro -M 77, I think this combo would work well with some 1.6 Roller Rockers and a new cam(still trying to decide) But back to my original question where can I get those heads and what is the best price you have found on them, I saw an ad for some that were stage one ported already for $750, would this be a good choice? Sorry so long,and thank you in advance.And to add, I have heard from Bow Tie eater's post that some were looking at the Trick Flow Street intake, should I consider this as well, what is that intake good up to compared to Cobra's 400 h.p.? And to add I did decide on getting the red alum, ASP pulley's to add color to my engine compartment, and have decided to get the Lentech Street Terminator, just not sure whether I will get it with the 12" or 10" converter. Man I better stop while I am ahead..

------------------
91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...

01-17-2001, 08:30 AM	#1
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	GT-40 heads and more Well I think I have decided to go slightly mild to medium modded and from what I have read from other stangers I am going to go with the GT-40P heads and down the road get them ported, but after looking through my recent mags, I cannot find a place to get these heads, I will be getting the Cobra intake and a larger T/B like 65MM, I think 70 may be too large for my application and then get a 73 C & L MAF or a Pro -M 77, I think this combo would work well with some 1.6 Roller Rockers and a new cam(still trying to decide) But back to my original question where can I get those heads and what is the best price you have found on them, I saw an ad for some that were stage one ported already for $750, would this be a good choice? Sorry so long,and thank you in advance.And to add, I have heard from Bow Tie eater's post that some were looking at the Trick Flow Street intake, should I consider this as well, what is that intake good up to compared to Cobra's 400 h.p.? And to add I did decide on getting the red alum, ASP pulley's to add color to my engine compartment, and have decided to get the Lentech Street Terminator, just not sure whether I will get it with the 12" or 10" converter. Man I better stop while I am ahead.. ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...