best drag springs for the $$$

james87gt · 01-17-2003, 05:01 PM

what's the best setup for a street strip car 90/10 70/30 4cly springs all around or 4's in front 8's in back with an air bag or should i just get a set of drag springs and if so who makes the best

bigred90gt · 01-17-2003, 09:15 PM

I would say Eibach drag launch (comes with an airbag) springs and 70/30 struts in the front and 50/50 shocks in the back.

Caymon

Mustang_GT_90 · 01-18-2003, 04:52 PM

I just did Lakewood 90/10s up front with the stock springs cut to lower it. And then Lakewood 50/50s in the back with cut 4 Cylinder springs.
I don't know how much it's gonna help me hook overall but I'd go with the 4 Cylinder springs if I were you.
It deffinatly helps get the front end up better. I've got a friend that is running 10.1 on one car and 10.7 with another using the same setup I just did.

01-17-2003, 05:01 PM	#1
james87gt Registered Member Join Date: Jan 2002 Posts: 62	best drag springs for the $$$ what's the best setup for a street strip car 90/10 70/30 4cly springs all around or 4's in front 8's in back with an air bag or should i just get a set of drag springs and if so who makes the best

01-17-2003, 09:15 PM	#2
bigred90gt 2 Stangs in the Stable Join Date: Apr 2002 Location: Baytown, TX Posts: 1,209	I would say Eibach drag launch (comes with an airbag) springs and 70/30 struts in the front and 50/50 shocks in the back. Caymon __________________ '90 GT Under construction Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!! 04 F-150 STX 4.2L 5 spd Rice Haters Club Member #128

01-18-2003, 04:52 PM	#3
Mustang_GT_90 Registered Member Join Date: Apr 2002 Posts: 68	I just did Lakewood 90/10s up front with the stock springs cut to lower it. And then Lakewood 50/50s in the back with cut 4 Cylinder springs. I don't know how much it's gonna help me hook overall but I'd go with the 4 Cylinder springs if I were you. It deffinatly helps get the front end up better. I've got a friend that is running 10.1 on one car and 10.7 with another using the same setup I just did. __________________ 90 Mustang, full weight, 5 speed, pulleys, 3.73 gears... 13.33@101 mph on stock motor and DOT's 12.44@112.5 on the juice. Check out our clubs website at http://www.stanggang.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
drag springs	meknized	Windsor Power	3	08-29-2004 08:17 PM
needing the best front and rear drag springs	Mustangboy89	Windsor Power	3	09-21-2001 01:30 PM
Lowering springs for drag racing?	Casper5.0	Windsor Power	2	08-30-2001 04:15 AM
Eibach Drag Launch Springs	glxstang	Windsor Power	14	08-10-2001 01:12 AM
car looks like 4x4 after drag launch springs	WADS56	Blue Oval Lounge	6	05-13-2001 02:04 AM