![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
motors done......woohooo
Join Date: Mar 2002
Posts: 799
|
![]() I POSTED THIS ON ANOTHER SITE TOO....MAYBE YOU GUYS CAN HELP ME OUT ALSO................read on--------->
im ready to buy injectors now....but i have no idea how much power i'll be making, and i obviously need a ballpark figure. everyone keeps telling me 83lbers would be perfect, and i'll have room to grow. heres my combo: dart block 347 eagle 4340 crank(3.4) eagle h beam rods(5.4) je dish pistons (8.5:1) afr 205's victor 5.0 75mm tb (fox style conversion) 80mm mass air anderson b-451 cam 3.73 gear w/27x11.5 quick time pro hoosiers tko 5 spd ys trim (which i have no pulleys for yet) i will probably boost around 15-17 to start off then if its safe,go up a little to 18-20. i have the pms with low impendance driver (no interaq software) i have no idea what kind of power i'll be making...or what it will run in the 1/4....mph...ect. can anyone shoot me a ballpark figure....so i can figure out what injectors i need to pick up. everyone keeps asking me how much power im shooting for.....but its really how ever much i end up with. LOL this is a full weight (tubular k member, no pass...or back seat) 95gt...i was told i should be somewhere in the 9.30-9.50 range, but again...i have no idea what kind of power that is...600-700-750?????? btw: i can drive the car so the 5spd isnt going to be that much of a limiting factor it will run on 100unleaded all the time...if i need to i can run 110 sorry about the "NEWBIE"-like question....i need injectors and pulleys so i can get this thing running thanks |
![]() |
![]() |
![]() |
|
|