EGR Questions

ChunkFunky · 04-19-2003, 08:24 AM

I'm putting on my new intake today.. and I dont have any gaskets for the EGR unit, so I need to get those, but I noticed that one of the coolant lines was plugged... (I bough it used) can I run the EGR without running the coolant into it?

-as

Technick · 04-19-2003, 11:16 AM

In a word Yes.......

ChunkFunky · 04-20-2003, 08:27 AM

it's not that big a deal to run the coolant lines, it's jsut that the inlet was plugged, so it seemd that it hadnt been used.

I got some gaskets here.. and they are stock gaskets.... the EGR and TB I got are 70MM and the gasket hangs into the air path... I figured I'd just trim them.. unless theres a reason I shouldnt
-as

04-19-2003, 08:24 AM	#1
ChunkFunky Registered Member Join Date: Apr 2002 Location: Tustin, CA Posts: 465	EGR Questions I'm putting on my new intake today.. and I dont have any gaskets for the EGR unit, so I need to get those, but I noticed that one of the coolant lines was plugged... (I bough it used) can I run the EGR without running the coolant into it? -as __________________ '89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit

04-19-2003, 11:16 AM	#2
Technick Registered Member Join Date: Feb 2003 Location: Seattle, Wa. Posts: 175	In a word Yes....... __________________ No matter how much you spend, or how much you prepare, there is ALWAYS someone else faster or quicker than YOU!!!!!!!!!!

04-20-2003, 08:27 AM	#3
ChunkFunky Registered Member Join Date: Apr 2002 Location: Tustin, CA Posts: 465	it's not that big a deal to run the coolant lines, it's jsut that the inlet was plugged, so it seemd that it hadnt been used. I got some gaskets here.. and they are stock gaskets.... the EGR and TB I got are 70MM and the gasket hangs into the air path... I figured I'd just trim them.. unless theres a reason I shouldnt -as __________________ '89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just got a 98, have some questions?	98GTNewbie	Modular Madness	5	08-30-2003 12:41 AM
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 12:40 PM
Several questions about oil.	zepherman	Windsor Power	3	08-03-2002 06:59 AM
HELP! Newbie 95-96 GT questions	Ron Brooks	Blue Oval Lounge	7	07-11-2001 07:38 PM
S/R Questions	DAMION	Racer's Club House	1	09-30-1999 11:02 AM