MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 06-01-2003, 01:37 PM   #1
bobtodd
Registered Member
 
Join Date: Dec 1998
Location: WI, U.S
Posts: 255
Default I need help with FP problem!!

I have had my car stored over the last sixth months. One of thing frist things I did this spring before starting it up was install a Kirban fuel pressure regulator. Well, I start the car up and the fuel pressure takes forever to get up to where its supposed to be....like it's slowly building up. Also, whenever I rev the car up the fuel pressure gauge needle doesnt move. The gauge basically doesnt move at all when I drive it either. You can see very tiny fluctuations in the needle but nothing big. The guage is an Auto Meter and I just put it on last year. I have no clue what to do. Could something be clogging my fuel up since it had been sitting all winter? I had a half a tank of gas in it through the winter and I added another five gallons of racing fuel in it before I started it up so there is some good gas in it.
The gauge shows that the fuel pressure holds steady after the car is turned off..no leak down.
I changed the fuel filter last summer. Could the fuel pump sock possibly be clogged?
If anyone has had a problem like this please let me know!! I may try putting the stock regulator back on to see if that does anything different. Thanks for the help!
__________________
91 LX - 10.5:1 pistons, ported 289 heads, Ultradyne 588 cam, Cobra upper/lower, MSD, JBA long tube headers, Flowmaster, Richmond 4:10, roll cage, monster tach...FUN!!

95 SHO - K&N filter
bobtodd is offline   Reply With Quote
Old 06-02-2003, 12:04 PM   #2
ArtMan
Registered Member
 
ArtMan's Avatar
 
Join Date: Dec 1998
Location: Scarsdale, NY
Posts: 45
Unhappy Other Approach

Are you sure it isn't your fuel pressure gauge?
How does the car run? If your not geeting the right pressure as the guage seems to indicate the engine should show some symptoms.
__________________
See my stang in the "Users Rides" section.
Rice Hater's Club Member #225
ArtMan is offline   Reply With Quote
Old 06-02-2003, 12:23 PM   #3
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

It sounds like you dont have a vacuum hose hooked to the regulator to me.

If a vacuum isnt put on the regulator the pressure wont move.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 06-02-2003, 07:15 PM   #4
bobtodd
Registered Member
 
Join Date: Dec 1998
Location: WI, U.S
Posts: 255
Default

I'm getting 6 inches of vacuum. All vacuum lines are connected and dont show signs of leaking. The vacuum line is on the regulator. When I pull the line off and on the fuel pressure doesnt change much. The car feels doggy. I dont want to get on it too much because I dont want to run lean at all...the fuel pressure doesnt go up when I gun it.
I am going to try and spray some carb cleaner around the intake and see if that does something.
__________________
91 LX - 10.5:1 pistons, ported 289 heads, Ultradyne 588 cam, Cobra upper/lower, MSD, JBA long tube headers, Flowmaster, Richmond 4:10, roll cage, monster tach...FUN!!

95 SHO - K&N filter
bobtodd is offline   Reply With Quote
Old 06-02-2003, 10:35 PM   #5
jimberg
Registered Member
 
jimberg's Avatar
 
Join Date: Oct 1998
Location: Rogers, MN
Posts: 2,089
Default

Use a diagnostic fuel pressure gauge and see what it does. Read the Tuning thread to see how to force the fuel pump to run without starting your engine. You just jumper the fuel pump test lead to ground when the key is in the on position. This is the best way to set your fuel pressure.
__________________
351W 89 Mustang GT Convertible
jimberg is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
follow up to horrible vibration problem Toeclicker Windsor Power 4 12-18-2003 06:38 PM
1988 2.3 Conv Mustang problem with Fan???? Mustang 2.3 Conv Small Ponies 0 05-20-2003 07:58 PM
Please help stutering problem Just me Windsor Power 10 10-18-2002 02:37 PM
surging problem? speed_Freek170 Small Ponies 1 08-30-2001 11:58 AM
Surging Problem - Help Lawless Windsor Power 32 08-19-2001 10:57 PM


All times are GMT -5. The time now is 10:29 PM.


SEARCH