Want free clear corners?

swtstang · 06-15-2001, 11:06 AM

Check this out
http://forums.stangnet.com/showthrea...threadid=55545

Smokedawg · 06-15-2001, 11:26 AM

Thats pretty cool. Might have to give it a try sometime..That will prob make my strobes flash brighter too!!

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

2FastLX · 06-15-2001, 12:05 PM

Had a buddy that did that. It looks pretty darn sweet.

------------------
Too much to list. Best ET on the car so far with stock 2.73 gears - 13.73@102mph

Indiana Stangers Association
Buy your parts here
ICQ# 42269241

fiveohpatrol · 06-16-2001, 02:20 AM

now you got another buddy that did it, i just did it a couple hours ago and it looks better than even those aftermarket clear corner lights, its pretty easy to do, just gotta take your time and not crack the housing taking it all apart (like me

)

------------------
88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

swtstang · 06-16-2001, 11:30 AM

DO you have any pics of it?

joey50gt · 06-16-2001, 11:11 PM

hey guys after i read this post i went out and did this to my car hay its free why not do it if it looks good and its free.
But for the guys that cant get their light covers to come apart here is what i did first i took small swiss army kinfe and a hammer and gently pried the cover and the backing apart they are some how melted to gether or some thing.Yeah on my forst light i had a couple of cracks and chips but after that the next one was easy to do.
and after you pry the cover and the backing apart just bust the amber plastic piece out and glue the cover and the backing back together with some good quality glue that is strong and let it dry and put them back on your car.
My car looks better with them on hope that the people that also do this have good luck
thanks to the guy who let us all know that we could do this.

06-15-2001, 11:06 AM	#1
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	Want free clear corners? Check this out http://forums.stangnet.com/showthrea...threadid=55545

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear tail marker lights	5P0INT0	Windsor Power	7	09-10-2003 06:53 PM
94-98 Clear Corners	Extremestang	Small Ponies	0	12-06-2002 08:12 PM
Trick for free corners was posted, but I can't find it. HELP!!!!!!	tireburner163	Blue Oval Lounge	2	09-17-2001 10:29 PM

06-15-2001, 11:26 AM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Thats pretty cool. Might have to give it a try sometime..That will prob make my strobes flash brighter too!! ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.

06-15-2001, 12:05 PM	#3
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Had a buddy that did that. It looks pretty darn sweet. ------------------ Too much to list. Best ET on the car so far with stock 2.73 gears - 13.73@102mph Indiana Stangers Association Buy your parts here ICQ# 42269241

06-16-2001, 02:20 AM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	now you got another buddy that did it, i just did it a couple hours ago and it looks better than even those aftermarket clear corner lights, its pretty easy to do, just gotta take your time and not crack the housing taking it all apart (like me ) ------------------ 88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

06-16-2001, 11:30 AM	#5
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	DO you have any pics of it?

06-16-2001, 11:11 PM	#6
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	hey guys after i read this post i went out and did this to my car hay its free why not do it if it looks good and its free. But for the guys that cant get their light covers to come apart here is what i did first i took small swiss army kinfe and a hammer and gently pried the cover and the backing apart they are some how melted to gether or some thing.Yeah on my forst light i had a couple of cracks and chips but after that the next one was easy to do. and after you pry the cover and the backing apart just bust the amber plastic piece out and glue the cover and the backing back together with some good quality glue that is strong and let it dry and put them back on your car. My car looks better with them on hope that the people that also do this have good luck thanks to the guy who let us all know that we could do this.